gzip: stdout: Broken pipe

gzip: stdout: Broken pipe
KSH(1)                                                                  KSH(1)



NAME
       ksh,  rksh,  pfksh  - KornShell, a standard/restricted command and pro-
       gramming language

SYNOPSIS
       ksh [ ?abcefhiknoprstuvxBCDP ] [ -R file ] [ ?o option ] ... [  -  ]  [
       arg ... ]

DESCRIPTION
       Ksh  is  a command and programming language that executes commands read
       from a terminal or a file.  Rksh is a restricted version of the command
       interpreter  ksh;  it is used to set up login names and execution envi-
       ronments whose capabilities are more controlled than those of the stan-
       dard  shell.   Rpfksh  is a profile shell version of the command inter-
       preter ksh; it is used to to execute commands with the attributes spec-
       ified by the user's profiles (see pfexec(1)).  See Invocation below for
       the meaning of arguments to the shell.

   Definitions.
       A metacharacter is one of the following characters:

              ;   &   (   )   |   <   >   new-line   space   tab

       A blank is a tab or a space.  An identifier is a sequence  of  letters,
       digits,  or  underscores starting with a letter or underscore.  Identi-
       fiers are used as components of variable names.  A vname is a  sequence
       of  one or more identifiers separated by a . and optionally preceded by
       a ..  Vnames are used as function and variable  names.   A  word  is  a
       sequence  of  characters  from the character set defined by the current
       locale, excluding non-quoted metacharacters.

       A command is a sequence of characters in the syntax of the  shell  lan-
       guage.  The shell reads each command and carries out the desired action
       either directly or by invoking separate utilities.  A built-in  command
       is a command that is carried out by the shell itself without creating a
       separate process.  Some commands are built-in  purely  for  convenience
       and  are not documented here.  Built-ins that cause side effects in the
       shell environment and built-ins that are found before performing a path
       search  (see Execution below) are documented here.  For historical rea-
       sons, some of these built-ins behave differently than  other  built-ins
       and are called special built-ins.

   Commands.
       A  simple-command  is  a  list  of  variable  assignments (see Variable
       Assignments below) or a sequence of blank separated words which may  be
       preceded  by  a  list  of variable assignments (see Environment below).
       The first word specifies the  name  of  the  command  to  be  executed.
       Except  as specified below, the remaining words are passed as arguments
       to the invoked command.  The command name is passed as argument 0  (see
       exec(2)).   The  value of a simple-command is its exit status; 0-255 if
       it terminates normally; 256+signum if  it  terminates  abnormally  (the
       name of the signal corresponding to the exit status can be obtained via
       the -l option of the kill built-in utility).

       A pipeline is a sequence of one or more commands separated by  |.   The
       standard  output of each command but the last is connected by a pipe(2)
       to the standard input of the next command.  Each command, except possi-
       bly  the  last,  is  run as a separate process; the shell waits for the
       last command to terminate.  The exit status of a pipeline is  the  exit
       status of the last command unless the pipefail option is enabled.  Each
       pipeline can be preceded by the reserved word !  which causes the  exit
       status  of  the  pipeline  to  become  0 if the exit status of the last
       command is non-zero, and 1 if the exit status of the last command is 0.

       A  list  is  a sequence of one or more pipelines separated by ;, &, |&,
       &&, or ||, and optionally terminated by ;, &, or  |&.   Of  these  five
       symbols,  ;,  &, and |& have equal precedence, which is lower than that
       of && and ||.  The symbols && and || also  have  equal  precedence.   A
       semicolon (;) causes sequential execution of the preceding pipeline; an
       ampersand (&) causes asynchronous execution of the  preceding  pipeline
       (i.e.,  the shell does not wait for that pipeline to finish).  The sym-
       bol |& causes asynchronous execution of the preceding pipeline  with  a
       two-way  pipe  established  to the parent shell; the standard input and
       output of the spawned pipeline can be written to and read from  by  the
       parent shell by applying the redirection operators <& and >& with arg p
       to commands and by using -p option of the built-in  commands  read  and
       print described later.  The symbol && (||) causes the list following it
       to be executed only if the preceding pipeline returns a zero (non-zero)
       value.   One  or more new-lines may appear in a list instead of a semi-
       colon, to delimit a command.  The first item  of the first pipeline  of
       a  list  that is a simple command not beginning with a redirection, and
       not occurring within a while, until, or if list, can be preceded  by  a
       semicolon.   This  semicolon  is  ignored  unless  the showme option is
       enabled as described with the set built-in below.

       A command is either a simple-command or one of the  following.   Unless
       otherwise  stated,  the value returned by a command is that of the last
       simple-command executed in the command.

       for vname [ in word ... ] ;do list ;done
              Each time a for command is executed, vname is set  to  the  next
              word  taken  from the in word list.  If in word ...  is omitted,
              then the for command executes the do list once  for  each  posi-
              tional  parameter  that  is  set  starting from 1 (see Parameter
              Expansion below).  Execution ends when there are no  more  words
              in the list.

       for (( [expr1] ; [expr2] ; [expr3] )) ;do list ;done
              The  arithmetic  expression expr1 is evaluated first (see Arith-
              metic evaluation below).  The  arithmetic  expression  expr2  is
              repeatedly  evaluated  until  it evaluates to zero and when non-
              zero, list is executed and the arithmetic expression expr3 eval-
              uated.   If  any expression is omitted, then it behaves as if it
              evaluated to 1.

       select vname [ in word ... ] ;do list ;done
              A select command prints on standard error  (file  descriptor  2)
              the set of words, each preceded by a number.  If in word ...  is
              omitted, then the positional parameters starting from 1 are used
              instead  (see  Parameter  Expansion  below).   The PS3 prompt is
              printed and a line is read from the  standard  input.   If  this
              line consists of the number of one of the listed words, then the
              value of the variable vname is set to the word corresponding  to
              this  number.   If  this  line  is  empty, the selection list is
              printed again.  Otherwise the value of the variable vname is set
              to  null.   The contents of the line read from standard input is
              saved in the variable REPLY.  The  list  is  executed  for  each
              selection  until  a break or end-of-file is encountered.  If the
              REPLY variable is set to null by the execution of list, then the
              selection  list  is printed before displaying the PS3 prompt for
              the next selection.

       case word in [ [(]pattern [ | pattern ] ... ) list ;; ] ... esac
              A case command executes the list associated with the first  pat-
              tern that matches word.  The form of the patterns is the same as
              that used for file-name generation  (see  File  Name  Generation
              below).   The ;; operator causes execution of case to terminate.
              If ;& is used in place of ;; the next subsequent list,  if  any,
              is executed.

       if list ;then list [ ;elif list ;then list ] ... [ ;else list ] ;fi
              The list following if is executed and, if it returns a zero exit
              status, the list following the first then is  executed.   Other-
              wise,  the  list following elif is executed and, if its value is
              zero, the list following the next  then  is  executed.   Failing
              each successive elif list, the else list is executed.  If the if
              list has non-zero exit status and there is no  else  list,  then
              the if command returns a zero exit status.

       while list ;do list ;done
       until list ;do list ;done
              A  while  command repeatedly executes the while list and, if the
              exit status of the last command in the list  is  zero,  executes
              the  do  list; otherwise the loop terminates.  If no commands in
              the do list are executed, then the while command returns a  zero
              exit  status;  until may be used in place of while to negate the
              loop termination test.

       ((expression))
              The expression is evaluated using the rules for arithmetic eval-
              uation  described below.  If the value of the arithmetic expres-
              sion is non-zero, the exit status is 0, otherwise the exit  sta-
              tus is 1.

       (list)
              Execute list in a separate environment.  Note, that if two adja-
              cent open parentheses are needed for nesting, a  space  must  be
              inserted  to  avoid  evaluation  as  an  arithmetic  command  as
              described above.

       { list;}
              list is simply executed.  Note that unlike the metacharacters  (
              and  ),  { and } are reserved words and must occur at the begin-
              ning of a line or after a ; in order to be recognized.

       [[ expression ]]
              Evaluates expression and returns a zero exit status when expres-
              sion is true.  See Conditional Expressions below, for a descrip-
              tion of expression.

       function varname { list ;}
       varname () { list ;}
              Define a function which is referenced by  varname.   A  function
              whose  varname contains a .  is called a discipline function and
              the portion of the varname preceding the last .  must  refer  to
              an  existing  variable.  The body of the function is the list of
              commands between { and }.  A function defined with the  function
              varname syntax can also be used as an argument to the .  special
              built-in command to get the equivalent behavior as if  the  var-
              name() syntax were used to define it.  (See Functions below.)

       namespace identifier { list ;}
              Defines  or uses the name space identifier and runs the commands
              in list in this name space.  (See Name Spaces below.)

       & [ name [ arg... ]  ]
              Causes subsequent list commands terminated by & to be placed  in
              the  background  job  pool  name.   If name is omitted a default
              unnamed pool is used.  Commands in a named background  pool  may
              be executed remotely.

       time [ pipeline ]
              If  pipeline is omitted the user and system time for the current
              shell and completed  child  processes  is  printed  on  standard
              error.   Otherwise, pipeline is executed and the elapsed time as
              well as the user and system time are printed on standard  error.
              The TIMEFORMAT variable may be set to a format string that spec-
              ifies how the timing information should be displayed.  See Shell
              Variables below for a description of the TIMEFORMAT variable.

       The  following reserved words are recognized as reserved only when they
       are the first word of a command and are not quoted:

       if then else elif fi case esac for while until do  done  {  }  function
       select time [[ ]] !

   Variable Assignments.
       One  or  more variable assignments can start a simple command or can be
       arguments to the typeset, enum, export, or  readonly  special  built-in
       commands  as  well  as  to other declaration commands created as types.
       The syntax for an assignment is of the form:

       varname=word
       varname[word]=word
              No space is permitted between varname and the = or between = and
              word.

       varname=(assign_list)
              No  space  is permitted between varname and the =.  The variable
              varname is unset before the assignment.  An assign_list  can  be
              one of the following:
                      word ...
                             Indexed array assignment.
                      [word]=word ...
                             Associative  array  assignment.   If  preceded by
                             typeset -a this  will  create  an  indexed  array
                             instead.
                      assignment ...
                             Compound  variable  assignment.   This  creates a
                             compound variable varname with  sub-variables  of
                             the  form  varname.name,  where  name is the name
                             portion of assignment.  The value of varname will
                             contain  all the assignment elements.  Additional
                             assignments made to sub-variables of varname will
                             also  be  displayed  as part of the value of var-
                             name.  If no assignments are  specified,  varname
                             will  be a compound variable allowing subsequence
                             child elements to be defined.
                      typeset [options] assignment ...
                             Nested variable assignment.  Multiple assignments
                             can  be specified by separating each of them with
                             a ;.  The previous  value  is  unset  before  the
                             assignment.   Other  declaration commands such as
                             readonly, enum, and  other  declaration  commands
                             can be used in place of typeset.
                      . filename
                             Include  the  assignment  commands  contained  in
                             filename.

       In addition, a += can be used in place of the = to signify adding to or
       appending  to  the previous value.  When += is applied to an arithmetic
       type, word is evaluated as an arithmetic expression and  added  to  the
       current value.  When applied to a string variable, the value defined by
       word is appended to the value.  For compound assignments, the  previous
       value  is not unset and the new values are appended to the current ones
       provided that the types are compatible.

       The right hand side of a variable assignment undergoes all  the  expan-
       sion listed below except word splitting, brace expansion, and file name
       generation.  When the left hand side is an  assignment  is  a  compound
       variable  and  the  right  hand is the name of a compound variable, the
       compound variable on the right will be copied or appended to  the  com-
       pound variable on the left.

   Comments.
       A  word beginning with # causes that word and all the following charac-
       ters up to a new-line to be ignored.
   Aliasing.
       The first word of each command is replaced by the text of an  alias  if
       an alias for this word has been defined.  An alias name consists of any
       number of characters excluding metacharacters, quoting characters, file
       expansion  characters,  parameter  expansion  and  command substitution
       characters, the characters / and =.  The replacement string can contain
       any  valid shell script including the metacharacters listed above.  The
       first word of each command in the replaced text, other  than  any  that
       are  in  the process of being replaced, will be tested for aliases.  If
       the last character of the alias value is a blank then the word  follow-
       ing the alias will also be checked for alias substitution.  Aliases can
       be used to redefine built-in commands but cannot be  used  to  redefine
       the  reserved  words  listed  above.  Aliases can be created and listed
       with the alias command and can be removed with the unalias command.
       Aliasing is performed when scripts are read, not while  they  are  exe-
       cuted.   Therefore,  for  an alias to take effect, the alias definition
       command has to be executed before  the  command  which  references  the
       alias is read.
       The  following  aliases are compiled into the shell but can be unset or
       redefined:
                           autoload=?typeset -fu?
                           command=?command  ?
                           compound=?typeset -C?
                           fc=hist
                           float=?typeset -lE?
                           functions=?typeset -f?
                           hash=?alias -t --?
                           history=?hist -l?
                           integer=?typeset -li?
                           nameref=?typeset -n?
                           nohup=?nohup  ?
                           r=?hist -s?
                           redirect=?command exec?
                           source=?command .?
                           stop=?kill -s STOP?
                           suspend=?kill -s STOP $$?
                           times=?{ { time;} 2>&1;}?
                           type=?whence -v?

   Tilde Substitution.
       After alias substitution is performed, each word is checked to  see  if
       it begins with an unquoted ~.  For tilde substitution, word also refers
       to the word portion of parameter  expansion  (see  Parameter  Expansion
       below).   If  it  does, then the word up to a / is checked to see if it
       matches a user name in the password database (See getpwname(3).)  If  a
       match  is  found,  the ~ and the matched login name are replaced by the
       login directory of the matched user.  If no match is found, the  origi-
       nal  text  is  left  unchanged.   A ~ by itself, or in front of a /, is
       replaced by $HOME.  A ~ followed by a + or - is replaced by  the  value
       of $PWD and $OLDPWD respectively.

       In  addition,  when expanding a variable assignment, tilde substitution
       is attempted when the value of the assignment begins with a ~, and when
       a ~ appears after a :.  The : also terminates a ~ login name.

   Command Substitution.
       The  standard  output  from a command list enclosed in parentheses pre-
       ceded by a dollar sign ( $(list) ), or in a brace group preceded  by  a
       dollar  sign  (  ${ list;} ), or in a pair of grave accents (``) may be
       used as part or all of a word; trailing new-lines are removed.  In  the
       second case, the { and } are treated as a reserved words so that { must
       be followed by a blank and } must appear at the beginning of  the  line
       or  follow  a  ;.  In the third (obsolete) form, the string between the
       quotes is processed for special quoting characters before  the  command
       is  executed (see Quoting below).  The command substitution $(cat file)
       can be replaced by the equivalent but  faster  $(<file).   The  command
       substitution  $(n<#)  will  expand  to the current byte offset for file
       descriptor n.  Except for the second form, the command list is run in a
       subshell  so  that  no side effects are possible.  For the second form,
       the final } will be recognized as a reserved word after any token.

   Arithmetic Substitution.
       An arithmetic expression enclosed in double parentheses preceded  by  a
       dollar  sign  (  $(())  )  is  replaced  by the value of the arithmetic
       expression within the double parentheses.

   Process Substitution.
       Each command argument of the form <(list) or >(list) will  run  process
       list asynchronously connected to some file in /dev/fd if this directory
       exists, or else a fifo a temporary directory.  The name  of  this  file
       will  become  the  argument  to  the  command.   If  the form with > is
       selected then writing on this file will provide input for list.   If  <
       is used, then the file passed as an argument will contain the output of
       the list process.  For example,

              paste <(cut -f1 file1) <(cut -f3 file2) | tee >(process1) >(pro-
              cess2)

       cuts fields 1 and 3 from the files file1 and file2 respectively, pastes
       the results together, and sends it to the processes process1  and  pro-
       cess2,  as  well as putting it onto the standard output.  Note that the
       file, which is passed as an argument to the command, is a UNIX  pipe(2)
       so programs that expect to lseek(2) on the file will not work.

       Process  substitution  of  the form <(list) can also be used with the <
       redirection operator which causes the output of  list  to  be  standard
       input or the input for whatever file descriptor is specified.

   Parameter Expansion.
       A parameter is a variable, one or more digits, or any of the characters
       *, @, #, ?, -, $, and !.  A variable is denoted by a vname.  To  create
       a variable whose vname contains a ., a variable whose vname consists of
       everything before the last . must already  exist.   A  variable  has  a
       value  and  zero  or more attributes.  Variables can be assigned values
       and attributes by using the  typeset  special  built-in  command.   The
       attributes  supported by the shell are described later with the typeset
       special  built-in  command.   Exported  variables   pass   values   and
       attributes to the environment.

       The  shell supports both indexed and associative arrays.  An element of
       an array variable is referenced by a subscript.   A  subscript  for  an
       indexed  array  is  denoted by an arithmetic expression (see Arithmetic
       evaluation below) between a [ and a ].  To assign values to an  indexed
       array, use vname=(value ...) or set -A vname  value ... .  The value of
       all  non-negative  subscripts  must  be  in  the  range  of  0  through
       4,194,303.  A negative subscript is treated as an offset from the maxi-
       mum current index +1 so that -1 refers to the  last  element.   Indexed
       arrays  can  be declared with the -a option to typeset.  Indexed arrays
       need not be declared.  Any reference to a variable with  a  valid  sub-
       script is legal and an array will be created if necessary.

       An  associative array is created with the -A option to typeset.  A sub-
       script for an associative array is denoted by a string enclosed between
       [ and ].

       Referencing  any array without a subscript is equivalent to referencing
       the array with subscript 0.

       The value of a variable may be assigned by writing:

              vname=value [ vname=value ] ...

       or
              vname[subscript]=value [ vname[subscript]=value ] ...
       Note that no space is allowed before or after the =.
       Attributes assigned by the typeset special built-in  command  apply  to
       all  elements of the array.  An array element can be a simple variable,
       a compound variable or an array variable.  An  element  of  an  indexed
       array  can be either an indexed array or an associative array.  An ele-
       ment of an associative array can also be either.  To refer to an  array
       element  that is part of an array element, concatenate the subscript in
       brackets.  For example, to refer to the foobar element of  an  associa-
       tive  array  that is defined as the third element of the indexed array,
       use ${vname[3][foobar]}
       A nameref is a variable that is a reference  to  another  variable.   A
       nameref  is created with the -n attribute of typeset.  The value of the
       variable at the time of the typeset command becomes the  variable  that
       will  be referenced whenever the nameref variable is used.  The name of
       a nameref cannot contain a ..  When a variable or  function  name  con-
       tains  a  .,  and the portion of the name up to the first . matches the
       name of a nameref, the variable referred to is  obtained  by  replacing
       the  nameref  portion  with  the name of the variable referenced by the
       nameref.  If a nameref is used as the index of a for loop, a name  ref-
       erence  is established for each item in the list.  A nameref provides a
       convenient way to refer to the variable inside a function whose name is
       passed  as  an  argument  to a function.  For example, if the name of a
       variable is passed as the first argument to a function, the command
              typeset -n var=$1
       inside the function causes references and assignments to var to be ref-
       erences  and  assignments to the variable whose name has been passed to
       the function.
       If any of the floating point attributes, -E, -F, or -X, or the  integer
       attribute,  -i,  is  set for vname, then the value is subject to arith-
       metic evaluation as described below.
       Positional parameters, parameters denoted by a number, may be  assigned
       values with the set special built-in command.  Parameter $0 is set from
       argument zero when the shell is invoked.
       The character $ is used to introduce substitutable parameters.
       ${parameter}
              The shell reads all the characters from ${ to the matching }  as
              part  of the same word even if it contains braces or metacharac-
              ters.  The value, if any, of the parameter is substituted.   The
              braces  are  required  when  parameter  is followed by a letter,
              digit, or underscore that is not to be interpreted  as  part  of
              its  name,  when the variable name contains a ..  The braces are
              also required when a variable is subscripted unless it  is  part
              of  an  Arithmetic  Expression  or a Conditional Expression.  If
              parameter is one or more digits then it is a positional  parame-
              ter.   A  positional  parameter  of  more than one digit must be
              enclosed in braces.  If parameter is * or @, then all the  posi-
              tional  parameters, starting with $1, are substituted (separated
              by a field separator character).  If an array  vname  with  last
              subscript  *  @,  or for index arrays of the form sub1 ..  sub2.
              is used, then the value for each of the  elements  between  sub1
              and sub2 inclusive (or all elements for * and @) is substituted,
              separated by the first character of the value of IFS.
       ${#parameter}
              If parameter is * or @, the number of positional  parameters  is
              substituted.   Otherwise, the length of the value of the parame-
              ter is substituted.
       ${#vname[*]}
       ${#vname[@]}
              The number of elements in the array vname is substituted.

       ${@vname}
              Expands to  the  type  name  (See  Type  Variables    below)  or
              attributes of the variable referred to by vname.
       ${!vname}
              Expands  to the name of the variable referred to by vname.  This
              will be vname except when vname is a name reference.
       ${!vname[subscript]}
              Expands to name of the subscript unless subscript is *,  @.   or
              of  the  form  sub1  ..  sub2.  When subscript is *, the list of
              array subscripts for vname is generated.  For a variable that is
              not  an array, the value is 0 if the variable is set.  Otherwise
              it is null.  When subscript is @, same  as  above,  except  that
              when  used in double quotes, each array subscript yields a sepa-
              rate argument.  When subscript is of the form sub1 ..   sub2  it
              expands  to  the list of subscripts between sub1 and sub2 inclu-
              sive using the same quoting rules as @.
       ${!prefix*}
              Expands to the names of the variables  whose  names  begin  with
              prefix.
       ${parameter:-word}
              If  parameter  is set and is non-null then substitute its value;
              otherwise substitute word.
       ${parameter:=word}
              If parameter is not set or is null then  set  it  to  word;  the
              value  of the parameter is then substituted.  Positional parame-
              ters may not be assigned to in this way.
       ${parameter:?word}
              If parameter is set and is non-null then substitute  its  value;
              otherwise,  print  word and exit from the shell (if not interac-
              tive).  If word is omitted then a standard message is printed.
       ${parameter:+word}
              If parameter is set and is non-null then substitute word; other-
              wise substitute nothing.
       In the above, word is not evaluated unless it is to be used as the sub-
       stituted string, so that, in the following  example,  pwd  is  executed
       only if d is not set or is null:
              print ${d:-$(pwd)}
       If  the  colon  (  :  ) is omitted from the above expressions, then the
       shell only checks whether parameter is set or not.
       ${parameter:offset:length}
       ${parameter:offset}
              Expands to the portion of the value of parameter starting at the
              character (counting from 0) determined by expanding offset as an
              arithmetic expression and consisting of the number of characters
              determined  by  the arithmetic expression defined by length.  In
              the second form, the remainder of the value is used.  If A nega-
              tive  offset  counts  backwards from the end of parameter.  Note
              that one or more blanks is required in front of a minus sign  to
              prevent  the  shell  from  interpreting  the operator as :-.  If
              parameter is * or @, or is an array name indexed by * or @, then
              offset  and  length  refer to the array index and number of ele-
              ments respectively.  A negative offset is taken relative to  one
              greater  than  the  highest  subscript  for indexed arrays.  The
              order for associate arrays is unspecified.
       ${parameter#pattern}
       ${parameter##pattern}
              If the shell pattern matches  the  beginning  of  the  value  of
              parameter,  then the value of this expansion is the value of the
              parameter with the matched portion deleted; otherwise the  value
              of  this parameter is substituted.  In the first form the small-
              est matching pattern is deleted  and  in  the  second  form  the
              largest matching pattern is deleted.  When parameter is @, *, or
              an array variable with subscript @ or *, the substring operation
              is applied to each element in turn.

       ${parameter%pattern}
       ${parameter%%pattern}
              If  the shell pattern matches the end of the value of parameter,
              then the value of this expansion is the value of  the  parameter
              with the matched part deleted; otherwise substitute the value of
              parameter.  In the first form the smallest matching  pattern  is
              deleted  and  in the second form the largest matching pattern is
              deleted.  When parameter is @, *, or an array variable with sub-
              script  @  or *, the substring operation is applied to each ele-
              ment in turn.

       ${parameter/pattern/string}
       ${parameter//pattern/string}
       ${parameter/#pattern/string}
       ${parameter/%pattern/string}
              Expands parameter and replaces the longest match of pattern with
              the  given  string.  Each occurrence of \n in string is replaced
              by the portion of parameter that matches the  n-th  sub-pattern.
              In  the  first  form,  only  the  first occurrence of pattern is
              replaced.  In  the  second  form,  each  match  for  pattern  is
              replaced by the given string.  The third form restricts the pat-
              tern match to the beginning of the string while the fourth  form
              restricts  the  pattern  match  to  the end of the string.  When
              string is null, the pattern will be deleted and the /  in  front
              of  string  may be omitted.  When parameter is @, *, or an array
              variable with subscript @ or *, the  substitution  operation  is
              applied  to each element in turn.  In this case, the string por-
              tion of word will be re-evaluated for each element.

       The following parameters are automatically set by the shell:
              #      The number of positional parameters in decimal.
              -      Options supplied to the shell on invocation or by the set
                     command.
              ?      The  decimal value returned by the last executed command.
              $      The process number of this shell.
              _      Initially, the value of _ is an absolute pathname of  the
                     shell  or script being executed as passed in the environ-
                     ment.  Subsequently it is assigned the last  argument  of
                     the previous command.  This parameter is not set for com-
                     mands which are asynchronous.   This  parameter  is  also
                     used  to  hold  the  name  of the matching MAIL file when
                     checking for mail.  While defining a compound variable or
                     a  type,  _ is initialized as a reference to the compound
                     variable or type.  When a discipline function is invoked,
                     _  is  initialized as a reference to the variable associ-
                     ated with the call to this function.  Finally when  _  is
                     used  as the name of the first variable of a type defini-
                     tion, the new type is derived from the type of the  first
                     variable (See Type Variables  below.).
              !      The  process  id  or  the pool name and job number of the
                     last background command invoked or the  most  recent  job
                     put  in  the  background  with  the  bg built-in command.
                     Background jobs started in a named pool will  be  in  the
                     form  pool.number  where pool is the pool name and number
                     is the job number within that pool.
              .sh.command
                     When processing a DEBUG trap, this variable contains  the
                     current command line that is about to run.
              .sh.edchar
                     This  variable contains the value of the keyboard charac-
                     ter (or sequence of characters if the first character  is
                     an  ESC, ascii 033) that has been entered when processing
                     a KEYBD trap (see Key Bindings below).  If the  value  is
                     changed  as  part  of the trap action, then the new value
                     replaces the key (or key sequence) that caused the  trap.
              .sh.edcol
                     The  character  position of the cursor at the time of the
                     most recent KEYBD trap.
              .sh.edmode
                     The value is set to ESC  when  processing  a  KEYBD  trap
                     while  in  vi insert mode.  (See Vi Editing Mode  below.)
                     Otherwise, .sh.edmode is null  when  processing  a  KEYBD
                     trap.
              .sh.edtext
                     The  characters  in  the  input buffer at the time of the
                     most recent KEYBD trap.  The value is null when not  pro-
                     cessing a KEYBD trap.
              .sh.file
                     The  pathname  of the file than contains the current com-
                     mand.
              .sh.fun
                     The name of the current function that is being  executed.
              .sh.level
                     Set  to  the current function depth.  This can be changed
                     inside a DEBUG trap and will set the context to the spec-
                     ified level.
              .sh.lineno
                     Set during a DEBUG trap to the line number for the caller
                     of each function.
              .sh.match
                     An indexed array which stores the most recent  match  and
                     sub-pattern  matches  after  conditional  pattern matches
                     that match and after variables expansions using the oper-
                     ators  #,  %, or /.  The 0-th element stores the complete
                     match and the i-th.  element stores  the  i-th  submatch.
                     The  .sh.match  variable  becomes unset when the variable
                     that has expanded is assigned a new value.
              .sh.math
                     Used for defining arithmetic  functions  (see  Arithmetic
                     evaluation  below).   and stores the list of user defined
                     arithmetic functions.
              .sh.name
                     Set to the name of the variable at the time that a disci-
                     pline function is invoked.
              .sh.subscript
                     Set  to  the  name  subscript of the variable at the time
                     that a discipline function is invoked.
              .sh.subshell
                     The current depth for subshells and command substitution.
              .sh.value
                     Set to the value of the variable at the time that the set
                     or append discipline function is invoked.   When  a  user
                     defined  arithmetic  function  is  invoked,  the value of
                     .sh.value is saved and .sh.value is set  to  long  double
                     precision floating point.  .sh.value is restored when the
                     function returns.
              .sh.version
                     Set to a value that identifies the version of this shell.
              KSH_VERSION
                     A name reference to .sh.version.
              LINENO The  current  line  number  within the script or function
                     being executed.
              OLDPWD The previous working directory set by the cd command.
              OPTARG The value of the last option argument  processed  by  the
                     getopts built-in command.
              OPTIND The  index  of  the last option argument processed by the
                     getopts built-in command.
              PPID   The process number of the parent of the shell.
              PWD    The present working directory set by the cd command.
              RANDOM Each time this variable is referenced, a random  integer,
                     uniformly  distributed between 0 and 32767, is generated.
                     The sequence of random  numbers  can  be  initialized  by
                     assigning a numeric value to RANDOM.
              REPLY  This  variable  is set by the select statement and by the
                     read built-in command when no arguments are supplied.
              SECONDS
                     Each time this variable is referenced, the number of sec-
                     onds  since  shell invocation is returned.  If this vari-
                     able is assigned a value, then the  value  returned  upon
                     reference  will  be  the value that was assigned plus the
                     number of seconds since the assignment.
              SHLVL  An integer variable the  is  incremented  each  time  the
                     shell is invoked and is exported.  If SHLVL is not in the
                     environment when the shell is invoked, it is set to 1.

       The following variables are used by the shell:
              CDPATH The search path for the cd command.
              COLUMNS
                     If this variable is set, the value is used to define  the
                     width of the edit window for the shell edit modes and for
                     printing select lists.
              EDITOR If the VISUAL variable is not  set,  the  value  of  this
                     variable  will  be  checked for the patterns as described
                     with VISUAL below and the  corresponding  editing  option
                     (see Special Command set below) will be turned on.
              ENV    If  this  variable is set, then parameter expansion, com-
                     mand substitution, and arithmetic substitution  are  per-
                     formed  on  the  value  to  generate  the pathname of the
                     script that will be executed when the  shell  is  invoked
                     interactively (see Invocation below).  This file is typi-
                     cally used  for  alias  and  function  definitions.   The
                     default value is $HOME/.kshrc.  On systems that support a
                     system wide  /etc/ksh.kshrc initialization file,  if  the
                     filename  generated  by  the expansion of ENV begins with
                     /./ or ././ the system wide initialization file will  not
                     be executed.
              FCEDIT Obsolete  name  for  the default editor name for the hist
                     command.  FCEDIT is not used when HISTEDIT is set.
              FIGNORE
                     A pattern that defines the set of filenames that will  be
                     ignored when performing filename matching.
              FPATH  The  search  path for function definitions.  The directo-
                     ries in this path are searched for a file with  the  same
                     name  as the function or command when a function with the
                     -u attribute is referenced and  when  a  command  is  not
                     found.   If an executable file with the name of that com-
                     mand is found, then it is read and executed in  the  cur-
                     rent  environment.   Unlike  PATH,  the current directory
                     must be represented explicitly by .  rather than by adja-
                     cent : characters or a beginning or ending :.
              HISTCMD
                     Number of the current command in the history file.
              HISTEDIT
                     Name for the default editor name for the hist command.
              HISTFILE
                     If  this  variable is set when the shell is invoked, then
                     the value is the pathname of the file that will  be  used
                     to  store  the  command  history  (see  Command  Re-entry
                     below).
              HISTSIZE
                     If this variable is set when the shell is  invoked,  then
                     the number of previously entered commands that are acces-
                     sible by this shell will be greater than or equal to this
                     number.  The default is 512.
              HOME   The default argument (home directory) for the cd command.
              IFS    Internal field separators, normally space, tab, and  new-
                     line  that  are  used  to separate the results of command
                     substitution  or  parameter  expansion  and  to  separate
                     fields with the built-in command read.  The first charac-
                     ter of the IFS variable is used to separate arguments for
                     the  "$*"  substitution (see Quoting below).  Each single
                     occurrence of an IFS character in the string to be split,
                     that is not in the isspace character class, and any adja-
                     cent characters in IFS that are in the isspace  character
                     class,  delimit  a  field.  One or more characters in IFS
                     that belong to the isspace  character  class,  delimit  a
                     field.   In  addition,  if  the  same  isspace  character
                     appears  consecutively  inside  IFS,  this  character  is
                     treated  as  if it were not in the isspace class, so that
                     if IFS consists of two tab characters, then two  adjacent
                     tab characters delimit a null field.
              JOBMAX This  variable  defines  the maximum number running back-
                     ground jobs that can run at a time.  When this  limit  is
                     reached, the shell will wait for a job to complete before
                     staring a new job.
              LANG   This variable determines the locale category for any cat-
                     egory  not specifically selected with a variable starting
                     with LC_ or LANG.
              LC_ALL This variable overrides the value of  the  LANG  variable
                     and any other LC_ variable.
              LC_COLLATE
                     This  variable determines the locale category for charac-
                     ter collation information.
              LC_CTYPE
                     This variable determines the locale category for  charac-
                     ter  handling  functions.   It  determines  the character
                     classes for pattern matching (see  File  Name  Generation
                     below).
              LC_NUMERIC
                     This variable determines the locale category for the dec-
                     imal point character.
              LINES  If this variable is set, the value is used  to  determine
                     the  column  length  for  printing  select lists.  Select
                     lists will print vertically  until  about  two-thirds  of
                     LINES lines are filled.
              MAIL   If  this  variable  is set to the name of a mail file and
                     the MAILPATH variable is not set, then the shell  informs
                     the user of arrival of mail in the specified file.
              MAILCHECK
                     This  variable specifies how often (in seconds) the shell
                     will check for changes in the modification time of any of
                     the  files  specified  by the MAILPATH or MAIL variables.
                     The default value is 600  seconds.   When  the  time  has
                     elapsed  the  shell  will  check  before issuing the next
                     prompt.
              MAILPATH
                     A colon ( : ) separated list  of  file  names.   If  this
                     variable  is  set, then the shell informs the user of any
                     modifications to the specified files that  have  occurred
                     within the last MAILCHECK seconds.  Each file name can be
                     followed by a ?  and a message that will be printed.  The
                     message will undergo parameter expansion, command substi-
                     tution, and arithmetic substitution with the variable  $_
                     defined  as  the  name of the file that has changed.  The
                     default message is you have mail in $_.
              PATH   The search path for commands (see Execution below).   The
                     user  may not change PATH if executing under rksh (except
                     in .profile).
              PS1    The value of this  variable  is  expanded  for  parameter
                     expansion, command substitution, and arithmetic substitu-
                     tion to define the primary prompt string which by default
                     is  ''$''.  The character !  in the primary prompt string
                     is replaced by the command number (see  Command  Re-entry
                     below).   Two successive occurrences of !  will produce a
                     single !  when the prompt string is printed.
              PS2    Secondary prompt string, by default ''> ''.
              PS3    Selection prompt string used within  a  select  loop,  by
                     default ''#? ''.
              PS4    The  value  of  this  variable  is expanded for parameter
                     evaluation, command substitution, and arithmetic  substi-
                     tution  and precedes each line of an execution trace.  By
                     default, PS4 is ''+ ''.  In addition when PS4  is  unset,
                     the execution trace prompt is also ''+ ''.
              SHELL  The pathname of the shell is kept in the environment.  At
                     invocation, if the basename  of  this  variable  is  rsh,
                     rksh,  or krsh, then the shell becomes restricted.  If it
                     is pfsh or pfksh, then the shell becomes a profile  shell
                     (see pfexec(1)).
              TIMEFORMAT
                     The  value  of  this parameter is used as a format string
                     specifying how the timing information for pipelines  pre-
                     fixed  with  the  time reserved word should be displayed.
                     The % character introduces  a  format  sequence  that  is
                     expanded  to a time value or other information.  The for-
                     mat sequences and their meanings are as follows.
                     %%        A literal %.
                     %[p][l]R  The elapsed time in seconds.
                     %[p][l]U  The number of CPU seconds spent in user mode.
                     %[p][l]S  The number of CPU seconds spent in system mode.
                     %P        The CPU percentage, computed as (U + S) / R.

                     The brackets denote optional portions.  The optional p is
                     a digit specifying the precision,  the  number  of  frac-
                     tional digits after a decimal point.  A value of 0 causes
                     no decimal point or fraction to be output.  At most three
                     places  after  the decimal point can be displayed; values
                     of p greater than 3 are treated as 3.  If p is not speci-
                     fied, the value 3 is used.

                     The optional l specifies a longer format, including hours
                     if greater than zero, minutes, and seconds  of  the  form
                     HHhMMmSS.FFs.   The  value of p determines whether or not
                     the fraction is included.

                     All other characters are  output  without  change  and  a
                     trailing  newline is added.  If unset, the default value,
                     $'\nreal\t%2lR\nuser\t%2lU\nsys%2lS', is  used.   If  the
                     value is null, no timing information is displayed.

              TMOUT  If  set  to  a value greater than zero, TMOUT will be the
                     default timeout value for the read built-in command.  The
                     select  compound  command  terminates after TMOUT seconds
                     when input is from a terminal.  Otherwise, the shell will
                     terminate  if a line is not entered within the prescribed
                     number of seconds while reading from a  terminal.   (Note
                     that  the  shell can be compiled with a maximum bound for
                     this value which cannot be exceeded.)

              VISUAL If  the  value  of  this  variable  matches  the  pattern
                     *[Vv][Ii]*,  then  the vi option (see Special Command set
                     below) is turned on.  If the value  matches  the  pattern
                     *gmacs*  ,  the  gmacs option is turned on.  If the value
                     matches the pattern *macs*, then the emacs option will be
                     turned  on.   The  value of VISUAL overrides the value of
                     EDITOR.

       The shell gives default values to PATH, PS1, PS2, PS3, PS4,  MAILCHECK,
       FCEDIT,  TMOUT and IFS, while HOME, SHELL, ENV, and MAIL are not set at
       all by the shell (although HOME is set by login(1)).  On  some  systems
       MAIL and SHELL are also set by login(1).

   Field Splitting.
       After parameter expansion and command substitution, the results of sub-
       stitutions are scanned for the field separator characters (those  found
       in IFS) and split into distinct fields where such characters are found.
       Explicit null fields ("" or ??) are  retained.   Implicit  null  fields
       (those resulting from parameters that have no values or command substi-
       tutions with no output) are removed.

       If the braceexpand (-B) option is set then each of the fields resulting
       from  IFS  are  checked to see if they contain one or more of the brace
       patterns {*,*}, {l1..l2} , {n1..n2} , {n1..n2% fmt} , {n1..n2  ..n3}  ,
       or {n1..n2 ..n3%fmt} , where * represents any character, l1,l2 are let-
       ters and n1,n2,n3 are signed numbers and fmt is a format  specified  as
       used  by  printf.   In  each case, fields are created by prepending the
       characters before the { and appending the characters  after  the  }  to
       each  of  the  strings generated by the characters between the { and }.
       The resulting fields are checked to see if they  have  any  brace  pat-
       terns.

       In  the first form, a field is created for each string between { and ,,
       between , and ,, and between , and }.  The string represented by *  can
       contain  embedded  matching { and } without quoting.  Otherwise, each {
       and } with * must be quoted.

       In the seconds form, l1 and l2 must both be either upper case  or  both
       be lower case characters in the C locale.  In this case a field is cre-
       ated for each character from l1 thru l2.

       In the remaining forms, a field is created for each number starting  at
       n1 and continuing until it reaches n2 incrementing n1 by n3.  The cases
       where n3 is not specified behave as if n3 where 1 if n1<=n2 and -1 oth-
       erwise.   If forms which specify %fmt any format flags, widths and pre-
       cisions can be specified and fmt can  end  in  any  of  the  specifiers
       cdiouxX.   For  example,  {a,z}{1..5..3%02d}{b..c}x  expands  to  the 8
       fields, a01bx, a01cx, a04bx, a04cx, z01bx, z01cx, z04bx and z4cx.

   File Name Generation.
       Following splitting, each field is scanned for the characters *, ?,  (,
       and  [  unless  the -f option has been set.  If one of these characters
       appears, then the word is regarded as a pattern.  Each file name compo-
       nent  that  contains  any  pattern character is replaced with a lexico-
       graphically sorted set of names that  matches  the  pattern  from  that
       directory.   If  no  file  name is found that matches the pattern, then
       that component of the filename is left unchanged unless the pattern  is
       prefixed  with ~(N) in which case it is removed as described below.  If
       FIGNORE is set, then each file name component that matches the  pattern
       defined by the value of FIGNORE is ignored when generating the matching
       filenames.  The names .  and ..  are also ignored.  If FIGNORE  is  not
       set,  the character .  at the start of each file name component will be
       ignored unless the first character of the pattern corresponding to this
       component  is  the  character  .  itself.  Note, that for other uses of
       pattern matching the / and .  are not treated specially.

              *      Matches any string, including the null string.  When used
                     for filename expansion, if the globstar option is on, two
                     adjacent *'s by itself will match all files and  zero  or
                     more  directories and subdirectories.  If followed by a /
                     then only directories and subdirectories will match.
              ?      Matches any single character.
              [...]  Matches any one of the enclosed characters.   A  pair  of
                     characters separated by - matches any character lexically
                     between the pair, inclusive.  If the first character fol-
                     lowing  the opening [ is a !  or ^ then any character not
                     enclosed is matched.  A - can be included in the  charac-
                     ter set by putting it as the first or last character.
                     Within  [  and ], character classes can be specified with
                     the syntax [:class:] where class is one of the  following
                     classes  defined  in the ANSI-C standard: (Note that word
                     is equivalent to alnum plus the character _.)
                     alnum alpha blank cntrl digit  graph  lower  print  punct
                     space upper word xdigit
                     Within  [  and  ],  an equivalence class can be specified
                     with the syntax [=c=] which matches all  characters  with
                     the same primary collation weight (as defined by the cur-
                     rent locale) as the character c.  Within [ and ],  [.sym-
                     bol.]  matches the collating symbol symbol.
       A  pattern-list  is  a list of one or more patterns separated from each
       other with a & or |.  A & signifies that all patterns must  be  matched
       whereas  |  requires  that only one pattern be matched.  Composite pat-
       terns can be formed with one or more of the following sub-patterns:
              ?(pattern-list)
                     Optionally matches any one of the given patterns.
              *(pattern-list)
                     Matches zero or more occurrences of the given patterns.
              +(pattern-list)
                     Matches one or more occurrences of the given patterns.
              {n}(pattern-list)
                     Matches n occurrences of the given patterns.
              {m,n}(pattern-list)
                     Matches from m to n occurrences of  the  given  patterns.
                     If  m  is  omitted,  0  will be used.  If n is omitted at
                     least m occurrences will be matched.
              @(pattern-list)
                     Matches exactly one of the given patterns.
              !(pattern-list)
                     Matches anything except one of the given patterns.
       By default, each pattern, or sub-pattern will match the longest  string
       possible consistent with generating the longest overall match.  If more
       than one match is possible, the one starting closest to  the  beginning
       of the string will be chosen.   However, for each of the above compound
       patterns a - can be inserted in front of the ( to  cause  the  shortest
       match to the specified pattern-list to be used.

       When  pattern-list is contained within parentheses, the backslash char-
       acter \ is treated specially even when inside a character class.    All
       ANSI-C character escapes are recognized and match the specified charac-
       ter.  In addition the following escape sequences are recognized:
              \d     Matches any character in the digit class.
              \D     Matches any character not in the digit class.
              \s     Matches any character in the space class.
              \S     Matches any character not in the space class.
              \w     Matches any character in the word class.
              \W     Matches any character not in the word class.

       A pattern of the form %(pattern-pair(s)) is a sub-pattern that  can  be
       used to match nested character expressions.  Each pattern-pair is a two
       character sequence which cannot contain & or |.  The first pattern-pair
       specifies  the starting and ending characters for the match.  Each sub-
       sequent pattern-pair represents the beginning and ending characters  of
       a  nested  group  that  will be skipped over when counting starting and
       ending character matches.  The behavior is unspecified when  the  first
       character of a pattern-pair is alpha-numeric except for the following:
              D      Causes  the  ending character to terminate the search for
                     this pattern without finding a match.
              E      Causes the ending  character  to  be  interpreted  as  an
                     escape character.
              L      Causes  the ending character to be interpreted as a quote
                     character causing all characters to be ignored when look-
                     ing for a match.
              Q      Causes  the ending character to be interpreted as a quote
                     character causing all characters other  than  any  escape
                     character to be ignored when looking for a match.
       Thus,  %({}Q"E\), matches characters starting at { until the matching }
       is found not counting any { or } that is inside a double quoted  string
       or  preceded  by  the  escape character \.  Without the {} this pattern
       matches any C language string.

       Each sub-pattern in a composite pattern is numbered, starting at 1,  by
       the  location of the ( within the pattern.  The sequence \n, where n is
       a single digit and \n comes after the n-th.  sub-pattern,  matches  the
       same string as the sub-pattern itself.

       Finally  a  pattern can contain sub-patterns of the form ~(options:pat-
       tern-list), where either  options  or  :pattern-list  can  be  omitted.
       Unlike  the other compound patterns, these sub-patterns are not counted
       in the  numbered  sub-patterns.   :pattern-list  must  be  omitted  for
       options  F,  G, N , and V below.  If options is present, it can consist
       of one or more of the following:
              +      Enable the following options.  This is the default.
              -      Disable the following options.
              E      The  remainder  of  the  pattern  uses  extended  regular
                     expression syntax like the egrep(1) command.
              F      The  remainder  of  the  pattern uses fgrep(1) expression
                     syntax.
              G      The remainder of the pattern uses basic  regular  expres-
                     sion syntax like the grep(1) command.
              K      The  remainder  of the pattern uses shell pattern syntax.
                     This is the default.
              N      This is ignored.  However, when it is  the  first  letter
                     and  is  used  with  file name generation, and no matches
                     occur, the file pattern expands to the empty string.
              X      The remainder  of  the  pattern  uses  augmented  regular
                     expression syntax like the xgrep(1) command.
              P      The remainder of the pattern uses perl(1) regular expres-
                     sion syntax.  Not all perl regular expression  syntax  is
                     currently implemented.
              V      The  remainder  of  the  pattern  uses  System  V regular
                     expression syntax.
              i      Treat the match as case insensitive.
              g      File the longest match (greedy).  This is the default.
              l      Left anchor the pattern.  This is the default for K style
                     patterns.
              r      Right  anchor  the  pattern.   This  is the default for K
                     style patterns.
       If both options and :pattern-list are specified, then the options apply
       only to  pattern-list.  Otherwise, these options remain in effect until
       they are disabled by a subsequent ~(...) or at the end of the  sub-pat-
       tern containing ~(...).

   Quoting.
       Each of the metacharacters listed earlier (see Definitions above) has a
       special meaning to the shell and causes termination of  a  word  unless
       quoted.   A character may be quoted (i.e., made to stand for itself) by
       preceding it with a \.  The pair \new-line is removed.  All  characters
       enclosed between a pair of single quote marks (??) that is not preceded
       by a $ are quoted.  A single quote  cannot  appear  within  the  single
       quotes.   A single quoted string preceded by an unquoted $ is processed
       as an ANSI-C string except for the following:
       \0     Causes the remainder of the string to be ignored.
       \E     Equivalent to the escape character (ascii 033),
       \e     Equivalent to the escape character (ascii 033),
       \cx    Expands to the character control-x.
       \C[.name.]
              Expands to the collating element name.

       Inside double quote marks  (""),  parameter  and  command  substitution
       occur  and  \  quotes the characters \, `, ", and $.  A $ in front of a
       double quoted string will be ignored in the "C" or "POSIX" locale,  and
       may  cause the string to be replaced by a locale specific string other-
       wise.  The meaning of $* and $@ is identical when not  quoted  or  when
       used  as  a variable assignment value or as a file name.  However, when
       used as a command argument, "$*" is equivalent to "$1d$2d...", where  d
       is  the first character of the IFS variable, whereas "$@" is equivalent
       to "$1" "$2" ....  Inside grave quote marks (``), \ quotes the  charac-
       ters \, `, and $.  If the grave quotes occur within double quotes, then
       \ also quotes the character ".

       The special meaning of reserved words or  aliases  can  be  removed  by
       quoting  any  character of the reserved word.  The recognition of func-
       tion names or built-in command names listed below cannot be altered  by
       quoting them.

   Arithmetic Evaluation.
       The  shell  performs arithmetic evaluation for arithmetic substitution,
       to evaluate an arithmetic command, to evaluate an  indexed  array  sub-
       script,  and  to  evaluate arguments to the built-in commands shift and
       let.  Evaluations are performed using double precision  floating  point
       arithmetic  or  long  double  precision floating point for systems that
       provide this data type.  Floating point  constants  follow  the  ANSI-C
       programming  language  floating  point conventions.  The floating point
       constants Nan and Inf can be use to represent "not a number" and infin-
       ity respectively.  Integer constants follow the ANSI-C programming lan-
       guage integer constant conventions although only single byte  character
       constants  are  recognized  and character casts are not recognized.  In
       addition constants can be of the form [base#]n where base is a  decimal
       number  between two and sixty-four representing the arithmetic base and
       n is a number in that base.  The digits above 9 are represented by  the
       lower case letters, the upper case letters, @, and _ respectively.  For
       bases less than or equal to 36, upper and lower case characters can  be
       used interchangeably.

       An arithmetic expression uses the same syntax, precedence, and associa-
       tivity of expression as the C language.  All the C  language  operators
       that  apply to floating point quantities can be used.  In addition, the
       operator ** can be used for exponentiation.  It has  higher  precedence
       than  multiplication  and  is  left associative.  In addition, when the
       value of an arithmetic variable or sub-expression can be represented as
       a  long  integer,  all  C language integer arithmetic operations can be
       performed.  Variables can be referenced by name  within  an  arithmetic
       expression  without using the parameter expansion syntax.  When a vari-
       able is referenced, its value is evaluated as an arithmetic expression.

       Any  of  the  following  math  library functions that are in the C math
       library can be used within an arithmetic expression:

       abs acos acosh asin asinh atan atan2 atanh cbrt ceil copysign cos  cosh
       erf erfc exp exp2 expm1 fabs fpclassify fdim finite floor fma fmax fmin
       fmod hypot ilogb int isfinite sinf isnan isnormal issubnormal  issubor-
       dered  iszero  j0  j1 jn lgamma log log10 log2 logb nearbyint nextafter
       nexttoward pow remainder rint round scanb signbit  sin  sinh  sqrt  tan
       tanh  tgamma  trunc  y0  y1 yn In addition, arithmetic functions can be
       define as shell functions with a variant of the function name syntax,

       function .sh.math.name ident ... { list ;}
              where name is the function name used in the  arithmetic  expres-
              sion  and each identifier, ident is a name reference to the long
              double  precision  floating  point  argument.   The   value   of
              .sh.value  when  the function returns is the value of this func-
              tion.  User defined functions can take up  to  3  arguments  and
              override C math library functions.

       An internal representation of a variable as a double precision floating
       point can be specified with the -E [n], -F [n], or -X [n] option of the
       typeset  special  built-in command.  The -E option causes the expansion
       of the value to be represented using scientific  notation  when  it  is
       expanded.  The optional option argument n defines the number of signif-
       icant figures.  The -F option causes the expansion to be represented as
       a floating decimal number when it is expanded.  The -X option cause the
       expansion to be represented using the %a format defined  by  ISO  C-99.
       The  optional  option argument n defines the number of places after the
       decimal (or radix) point in this case.

       An internal integer representation of a variable can be specified  with
       the  -i  [n]  option  of  the  typeset  special  built-in command.  The
       optional option argument n specifies an arithmetic base to be used when
       expanding the variable.  If you do not specify an arithmetic base, base
       10 will be used.

       Arithmetic evaluation is performed on the value of each assignment to a
       variable  with  the  -E, -F, -X, or -i attribute.  Assigning a floating
       point number to a variable whose type is an integer  causes  the  frac-
       tional part to be truncated.


   Prompting.
       When  used interactively, the shell prompts with the value of PS1 after
       expanding it for parameter expansion, command substitution, and  arith-
       metic substitution, before reading a command.  In addition, each single
       !  in the prompt is replaced by the command number.  A !!  is  required
       to place !  in the prompt.  If at any time a new-line is typed and fur-
       ther input is needed to complete a command, then the  secondary  prompt
       (i.e., the value of PS2) is issued.

   Conditional Expressions.
       A  conditional  expression is used with the [[ compound command to test
       attributes of files and to compare strings.  Field splitting  and  file
       name generation are not performed on the words between [[ and ]].  Each
       expression can be constructed from one or more of the  following  unary
       or binary expressions:
       string True, if string is not null.
       -a file
              Same as -e below.  This is obsolete.
       -b file
              True, if file exists and is a block special file.
       -c file
              True, if file exists and is a character special file.
       -d file
              True, if file exists and is a directory.
       -e file
              True, if file exists.
       -f file
              True, if file exists and is an ordinary file.
       -g file
              True, if file exists and it has its setgid bit set.
       -k file
              True, if file exists and it has its sticky bit set.
       -n string
              True, if length of string is non-zero.
       -o ?option
              True, if option named option is a valid option name.
       -o option
              True, if option named option is on.
       -p file
              True, if file exists and is a fifo special file or a pipe.
       -r file
              True, if file exists and is readable by current process.
       -s file
              True, if file exists and has size greater than zero.
       -t fildes
              True,  if  file  descriptor number fildes is open and associated
              with a terminal device.
       -u file
              True, if file exists and it has its setuid bit set.
       -v name
              True, if variable name is a valid variable name and is set.
       -w file
              True, if file exists and is writable by current process.
       -x file
              True, if file exists and is executable by current  process.   If
              file exists and is a directory, then true if the current process
              has permission to search in the directory.
       -z string
              True, if length of string is zero.
       -L file
              True, if file exists and is a symbolic link.
       -h file
              True, if file exists and is a symbolic link.
       -N file
              True, if file exists and the modification time is  greater  than
              the last access time.
       -O file
              True,  if  file  exists and is owned by the effective user id of
              this process.
       -G file
              True, if file exists and its group matches the  effective  group
              id of this process.
       -R name
              True if variable name is a name reference.
       -S file
              True, if file exists and is a socket.
       file1 -nt file2
              True, if file1 exists and file2 does not, or file1 is newer than
              file2.
       file1 -ot file2
              True, if file2 exists and file1 does not, or file1 is older than
              file2.
       file1 -ef file2
              True, if file1 and file2 exist and refer to the same file.
       string == pattern
              True,  if  string  matches  pattern.  Any part of pattern can be
              quoted to cause it to be matched as a string.  With a successful
              match  to  a  pattern, the .sh.match array variable will contain
              the match and sub-pattern matches.
       string = pattern
              Same as == above, but is obsolete.
       string != pattern
              True, if string does not match pattern.  When the string matches
              the  pattern the .sh.match array variable will contain the match
              and sub-pattern matches.
       string =~ ere
              True if string matches the  pattern  ~(E)ere  where  ere  is  an
              extended regular expression.
       string1 < string2
              True,  if  string1  comes before string2 based on ASCII value of
              their characters.
       string1 > string2
              True, if string1 comes after string2 based  on  ASCII  value  of
              their characters.
       The following obsolete arithmetic comparisons are also permitted:
       exp1 -eq exp2
              True, if exp1 is equal to exp2.
       exp1 -ne exp2
              True, if exp1 is not equal to exp2.
       exp1 -lt exp2
              True, if exp1 is less than exp2.
       exp1 -gt exp2
              True, if exp1 is greater than exp2.
       exp1 -le exp2
              True, if exp1 is less than or equal to exp2.
       exp1 -ge exp2
              True, if exp1 is greater than or equal to exp2.

       In  each  of  the  above expressions, if file is of the form /dev/fd/n,
       where n is an integer, then the test is applied to the open file  whose
       descriptor number is n.

       A compound expression can be constructed from these primitives by using
       any of the following, listed in decreasing order of precedence.
       (expression)
              True, if expression is true.  Used to group expressions.
       ! expression
              True if expression is false.
       expression1 && expression2
              True, if expression1 and expression2 are both true.
       expression1 || expression2
              True, if either expression1 or expression2 is true.

   Input/Output.
       Before a command is executed, its input and output  may  be  redirected
       using  a  special notation interpreted by the shell.  The following may
       appear anywhere in a simple-command or may precede or follow a  command
       and  are  not  passed on to the invoked command.  Command substitution,
       parameter expansion, and arithmetic substitution occur before  word  or
       digit  is used except as noted below.  File name generation occurs only
       if the shell is interactive and the  pattern  matches  a  single  file.
       Field splitting is not performed.

       In  each  of  the  following  redirections,  if  file  is  of  the form
       /dev/sctp/host/port, /dev/tcp/host/port, or  /dev/udp/host/port,  where
       host is a hostname or host address, and port is a service given by name
       or an integer port number, then the redirection attempts to make a tcp,
       sctp or udp connection to the corresponding socket.

       No  intervening  space is allowed between the characters of redirection
       operators.

       <word         Use file word as standard input (file descriptor 0).

       >word         Use file word as standard output (file descriptor 1).  If
                     the  file does not exist then it is created.  If the file
                     exists, and the noclobber option is on,  this  causes  an
                     error; otherwise, it is truncated to zero length.

       >|word        Same as >, except that it overrides the noclobber option.

       >;word        Write output to a temporary file.  If  the  command  com-
                     pletes  successfully rename it to word, otherwise, delete
                     the temporary file.   >;word  cannot  be  used  with  the
                     exec(2).  built-in.

       >>word        Use  file  word  as standard output.  If the file exists,
                     then output is appended to it (by first  seeking  to  the
                     end-of-file); otherwise, the file is created.

       <>word        Open  file  word for reading and writing as standard out-
                     put.

       <>;word       The same as <>word except that if the  command  completes
                     successfully,  word is truncated to the offset at command
                     completion.  <>;word cannot be  used  with  the  exec(2).
                     built-in.

       <<[-]word     The  shell input is read up to a line that is the same as
                     word after any quoting has been removed, or to an end-of-
                     file.   No  parameter substitution, command substitution,
                     arithmetic substitution or file name generation  is  per-
                     formed  on  word.  The resulting document, called a here-
                     document, becomes the standard input.  If  any  character
                     of  word is quoted, then no interpretation is placed upon
                     the characters  of  the  document;  otherwise,  parameter
                     expansion, command substitution, and arithmetic substitu-
                     tion occur, \new-line is ignored, and \ must be  used  to
                     quote  the  characters  \, $, `.  If - is appended to <<,
                     then all leading tabs are stripped from word and from the
                     document.   If  #  is appended to <<, then leading spaces
                     and tabs will be stripped off the first line of the docu-
                     ment and up to an equivalent indentation will be stripped
                     from the remaining lines and from word.  A  tab  stop  is
                     assumed  to  occur at every 8 columns for the purposes of
                     determining the indentation.

       <<<word       A short form of here document in which word  becomes  the
                     contents  of the here-document after any parameter expan-
                     sion, command substitution, and  arithmetic  substitution
                     occur.

       <&digit       The  standard  input  is  duplicated from file descriptor
                     digit (see dup(2)).  Similarly for  the  standard  output
                     using >&digit.

       <&digit-      The  file  descriptor given by digit is moved to standard
                     input.  Similarly for the standard output using >&digit-.

       <&-           The standard input is closed.  Similarly for the standard
                     output using >&-.

       <&p           The input from the co-process is moved to standard input.

       >&p           The output to the co-process is moved to standard output.

       <#((expr))    Evaluate arithmetic expression  expr  and  position  file
                     descriptor  0 to the resulting value bytes from the start
                     of the file.  The variables CUR and EOF evaluate  to  the
                     current  offset  and end-of-file offset respectively when
                     evaluating expr.

       >#((offset))  The same as <# except applies to file descriptor 1.

       <#pattern     Seeks forward to the beginning of the next line  contain-
                     ing pattern.

       <##pattern    The  same  as <# except that the portion of the file that
                     is skipped is copied to standard output.

       If one of the above is preceded by a digit, with no intervening  space,
       then  the  file  descriptor number referred to is that specified by the
       digit (instead of the default 0 or 1).  If one of the above, other than
       >&- and the ># and <# forms, is preceded by {varname} with no interven-
       ing space, then a file descriptor number > 10 will be selected  by  the
       shell  and stored in the variable varname.  If >&- or the any of the >#
       and <# forms is preceded by {varname} the value of varname defines  the
       file descriptor to close or position.  For example:

              ... 2>&1

       means  file  descriptor 2 is to be opened for writing as a duplicate of
       file descriptor 1 and

              exec {n}<file

       means open file named file for reading and store  the  file  descriptor
       number in variable n.

       The  order  in  which  redirections  are specified is significant.  The
       shell evaluates each redirection in  terms  of  the  (file  descriptor,
       file) association at the time of evaluation.  For example:

              ... 1>fname 2>&1

       first associates file descriptor 1 with file fname.  It then associates
       file descriptor 2 with the file associated with file descriptor 1 (i.e.
       fname).   If the order of redirections were reversed, file descriptor 2
       would be associated with the terminal (assuming file descriptor  1  had
       been) and then file descriptor 1 would be associated with file fname.

       If  a  command is followed by & and job control is not active, then the
       default standard input for the command is  the  empty  file  /dev/null.
       Otherwise,  the environment for the execution of a command contains the
       file descriptors of the invoking  shell  as  modified  by  input/output
       specifications.

   Environment.
       The  environment (see environ(7)) is a list of name-value pairs that is
       passed to an executed program in the same  way  as  a  normal  argument
       list.   The  names  must  be  identifiers  and the values are character
       strings.  The shell interacts with the environment in several ways.  On
       invocation,  the shell scans the environment and creates a variable for
       each name found, giving it the corresponding value and  attributes  and
       marking  it export.  Executed commands inherit the environment.  If the
       user modifies the values of these variables or creates new ones,  using
       the export or typeset -x commands, they become part of the environment.
       The environment seen by any executed command is thus  composed  of  any
       name-value pairs originally inherited by the shell, whose values may be
       modified by the current shell, plus any additions which must  be  noted
       in export or typeset -x commands.

       The  environment for any simple-command or function may be augmented by
       prefixing it with one or more variable assignments.  A variable assign-
       ment argument is a word of the form identifier=value.  Thus:

              TERM=450 cmd args                  and
              (export TERM; TERM=450; cmd args)

       are  equivalent  (as  far  as  the  above execution of cmd is concerned
       except for special built-in commands listed below - those that are pre-
       ceded with a dagger).

       If the obsolete -k option is set, all variable assignment arguments are
       placed in the environment, even if they occur after the  command  name.
       The following first prints a=b c and then c:

              echo a=b c
              set -k
              echo a=b c
       This  feature  is  intended for use with scripts written for early ver-
       sions of the shell and its use in new scripts is strongly  discouraged.
       It is likely to disappear someday.

   Functions.
       For  historical  reasons,  there  are two ways to define functions, the
       name() syntax and the function name syntax, described in  the  Commands
       section  above.   Shell  functions  are  read in and stored internally.
       Alias names are resolved when the function is read.  Functions are exe-
       cuted like commands with the arguments passed as positional parameters.
       (See Execution below.)

       Functions defined by the function name syntax and called by  name  exe-
       cute  in the same process as the caller and share all files and present
       working directory with the caller.  Traps  caught  by  the  caller  are
       reset  to  their  default action inside the function.  A trap condition
       that is not caught or ignored by the function causes  the  function  to
       terminate  and  the condition to be passed on to the caller.  A trap on
       EXIT set inside a function is executed in the environment of the caller
       after the function completes.  Ordinarily, variables are shared between
       the calling program and the function.   However,  the  typeset  special
       built-in  command  used within a function defines local variables whose
       scope includes the current function.  They can be passed  to  functions
       that  they  call in the variable assignment list that precedes the call
       or as arguments passed as name  references.   Errors  within  functions
       return control to the caller.

       Functions defined with the name() syntax and functions defined with the
       function name syntax that are invoked with the .  special built-in  are
       executed  in the caller's environment and share all variables and traps
       with the caller.  Errors within these  function  executions  cause  the
       script that contains them to abort.

       The  special  built-in  command  return is used to return from function
       calls.

       Function names can be listed with the -f or +f option  of  the  typeset
       special  built-in command.  The text of functions, when available, will
       also be listed with -f.  Functions can be undefined with the -f  option
       of the unset special built-in command.

       Ordinarily, functions are unset when the shell executes a shell script.
       Functions that need to be defined across separate  invocations  of  the
       shell  should  be  placed  in a directory and the FPATH variable should
       contain the name of this directory.  They may also be specified in  the
       ENV file.

   Discipline Functions.
       Each  variable  can  have  zero or more discipline functions associated
       with it.  The shell initially understands  the  discipline  names  get,
       set,  append,  and  unset but can be added when defining new types.  On
       most systems others can be added at run  time  via  the  C  programming
       interface  extension  provided by the builtin built-in utility.  If the
       get discipline is defined for a variable, it is  invoked  whenever  the
       given  variable is referenced.  If the variable .sh.value is assigned a
       value inside the discipline  function,  the  referenced  variable  will
       evaluate to this value instead.  If the set discipline is defined for a
       variable, it is invoked whenever  the  given  variable  is  assigned  a
       value.   If  the  append  discipline  is  defined for a variable, it is
       invoked whenever a value is appended to the given variable.  The  vari-
       able  .sh.value  is given the value of the variable before invoking the
       discipline, and the variable will be assigned the  value  of  .sh.value
       after  the discipline completes.  If .sh.value is unset inside the dis-
       cipline, then that value is unchanged.   If  the  unset  discipline  is
       defined  for  a  variable, it is invoked whenever the given variable is
       unset.  The variable will not be unset unless it  is  unset  explicitly
       from within this discipline function.

       The  variable  .sh.name contains the name of the variable for which the
       discipline function is called, .sh.subscript is the  subscript  of  the
       variable,  and  .sh.value  will contain the value being assigned inside
       the set discipline function.  The variable _  is  a  reference  to  the
       variable  including  the  subscript  if  any.   For the set discipline,
       changing .sh.value will change the value that gets assigned.   Finally,
       the  expansion  ${var.name}, when name is the name of a discipline, and
       there is no variable of this name, is equivalent to the command substi-
       tution ${ var.name;}.


   Name Spaces.
       Commands  and  functions  that  are  executed  as part of the list of a
       namespace command that modify variables or create new  ones,  create  a
       new variable whose name is the name of the name space as given by iden-
       tifier preceded by ..  When a variable whose name  is  name  is  refer-
       enced,  it  is first searched for using .identifier.name.  Similarly, a
       function defined by a command in the namespace list  is  created  using
       the name space name  preceded by a ..

       When  the list of a namespace command contains a namespace command, the
       names of variables and functions that are created consist of the  vari-
       able or function name preceded by the list of identifiers each preceded
       by ..

       Outside of a name space, a variable or function created inside  a  name
       space can be referenced by preceding it with the name space name.

       By default, variables staring with .sh are in the sh name space.


   Type Variables.
       Typed  variables provide a way to create data structure and objects.  A
       type can be defined either by a shared library, by  the  enum  built-in
       command  described  below, or by using the new -T option of the typeset
       built-in command.  With the -T option of typeset, the type name, speci-
       fied  as  an  option  argument  to  -T, is set with a compound variable
       assignment that defines the  type.   Function  definitions  can  appear
       inside  the  compound  variable  assignment and these become discipline
       functions for this type  and  can  be  invoked  or  redefined  by  each
       instance  of  the type.  The function name create is treated specially.
       It is invoked for each instance of the type that is created but is  not
       inherited and cannot be redefined for each instance.

       When  a  type  is  defined  a  special built-in command of that name is
       added.  These built-ins are declaration commands and  follow  the  same
       expansion rules as all the special built-in commands defined below that
       are preceded by ++.  These commands can  subsequently  be  used  inside
       further  type definitions.  The man page for these commands can be gen-
       erated by using the --man  option  or  any  of  the  other  --  options
       described  with getopts.  The -r, -a, -A, -h, and -S options of typeset
       are permitted with each of these new built-ins.

       An instance of a type is created by invoking the type name followed  by
       one  or  more instance names.  Each instance of the type is initialized
       with a copy of the sub-variables  except  for  sub-variables  that  are
       defined  with  the -S option.  Variables defined with the -S are shared
       by all instances of the type.  Each instance can change  the  value  of
       any  sub-variable  and  can also define new discipline functions of the
       same names as those defined by the type definition as well as any stan-
       dard  discipline names.  No additional sub-variables can be defined for
       any instance.

       When defining a type, if the value of a sub-variable is not set and the
       -r  attribute is specified, it causes the sub-variable to be a required
       sub-variable.  Whenever an instance of a type is created, all  required
       sub-variables  must  be specified.  These sub-variables become readonly
       in each instance.

       When unset is invoked on a sub-variable  within  a  type,  and  the  -r
       attribute  has not been specified for this field, the value is reset to
       the default value associative with the type.  Invoking unset on a  type
       instance  not  contained  within another type deletes all sub-variables
       and the variable itself.

       A type definition can be derived from another type definition by defin-
       ing  the first sub-variable name as _ and defining its type as the base
       type.  Any remaining definitions will be  additions  and  modifications
       that  apply  to the new type.  If the new type name is the same is that
       of the base type, the type will be replaced and the original type  will
       no longer be accessible.

       The typeset command with the -T and no option argument or operands will
       write all the type definitions to standard output in a form  that  that
       can be read in to create all they types.

   Jobs.
       If  the  monitor option of the set command is turned on, an interactive
       shell associates a job with each pipeline.  It keeps a table of current
       jobs,  printed by the jobs command, and assigns them small integer num-
       bers.  When a job is started asynchronously with &, the shell prints  a
       line which looks like:

            [1] 1234

       indicating that the job which was started asynchronously was job number
       1 and had one (top-level) process, whose process id was 1234.

       This paragraph and the next require features that are not in  all  ver-
       sions  of UNIX and may not apply.  If you are running a job and wish to
       do something else you may hit the key ^Z (control-Z) which sends a STOP
       signal  to the current job.  The shell will then normally indicate that
       the job has been 'Stopped', and print another  prompt.   You  can  then
       manipulate the state of this job, putting it in the background with the
       bg command, or run some other commands and then  eventually  bring  the
       job  back  into  the  foreground  with the foreground command fg.  A ^Z
       takes effect immediately and is like an interrupt in that pending  out-
       put and unread input are discarded when it is typed.

       A  job  being  run in the background will stop if it tries to read from
       the terminal.  Background jobs are normally allowed to produce  output,
       but this can be disabled by giving the command stty tostop.  If you set
       this tty option, then background jobs will stop when they try  to  pro-
       duce output like they do when they try to read input.

       A  job pool is a collection of jobs started with list & associated with
       a name.

       There are several ways to refer to jobs in the shell.   A  job  can  be
       referred  to  by  the process id of any process of the job or by one of
       the following:
       %number
              The job with the given number.
       pool   All the jobs in the job pool named by pool.
       pool.number
              The job number number in the job pool named by pool.
       %string
              Any job whose command line begins with string.
       %?string
              Any job whose command line contains string.
       %%     Current job.
       %+     Equivalent to %%.
       %-     Previous job.  In addition, unless noted otherwise,  wherever  a
              job  can  be specified, the name of a background job pool can be
              used to represent all the jobs in that pool.

       The shell learns immediately whenever a process changes state.  It nor-
       mally  informs  you  whenever  a job becomes blocked so that no further
       progress is possible, but only just before it prints a prompt.  This is
       done  so  that  it  does  not  otherwise disturb your work.  The notify
       option of the set command causes the shell to print  these  job  change
       messages as soon as they occur.

       When the monitor option is on, each background job that completes trig-
       gers any trap set for CHLD.

       When you try to leave the shell while jobs are running or stopped,  you
       will  be warned that 'You have stopped(running) jobs.'  You may use the
       jobs command to see what they are.  If  you  immediately  try  to  exit
       again,  the shell will not warn you a second time, and the stopped jobs
       will be terminated.  When a login shell receives a HUP signal, it sends
       a  HUP  signal  to  each job that has not been disowned with the disown
       built-in command described below.

   Signals.
       The INT and QUIT signals for an invoked command are ignored if the com-
       mand  is  followed  by  & and the monitor option is active.  Otherwise,
       signals have the values inherited by the shell from its parent (but see
       also the trap built-in command below).

   Execution.
       Each  time  a command is read, the above substitutions are carried out.
       If the command name matches one of the Special Built-in Commands listed
       below,  it  is  executed  within  the current shell process.  Next, the
       command name is checked to see if it matches a user  defined  function.
       If  it  does, the positional parameters are saved and then reset to the
       arguments of the function call.  A function is  also  executed  in  the
       current shell process.  When the function completes or issues a return,
       the positional parameter list is restored.  For functions defined  with
       the  function  name syntax, any trap set on EXIT within the function is
       executed.  The exit value of a function is the value of the  last  com-
       mand  executed.  If a command name is not a special built-in command or
       a user defined function, but it is one of the built-in commands  listed
       below, it is executed in the current shell process.

       The  shell  variables  PATH  followed by the variable FPATH defines the
       list of directories to search for the command name.  Alternative direc-
       tory  names are separated by a colon (:).  The default path is equal to
       getconf PATH output.  The current directory can be specified by two  or
       more adjacent colons, or by a colon at the beginning or end of the path
       list.  If the command name contains a /, then the search  path  is  not
       used.   Otherwise, each directory in the list of directories defined by
       PATH and FPATH is checked in order.  If the directory being searched is
       contained  in  FPATH and contains a file whose name matches the command
       being searched, then this file is loaded into the current  shell  envi-
       ronment  as  if  it were the argument to the . command except that only
       preset aliases are expanded, and a function of the given name  is  exe-
       cuted as described above.

       If  this  directory  is not in FPATH the shell first determines whether
       there is a built-in version of a command corresponding to a given path-
       name and if so it is invoked in the current process.  If no built-in is
       found, the shell checks for a file named .paths in this directory.   If
       found  and  there  is a line of the form FPATH=path where path names an
       existing directory then that directory is  searched  after  immediately
       after  the current directory as if it were found in the FPATH variable.
       If path does not begin with /, it is checked for relative to the direc-
       tory being searched.

       The .paths file is then checked  for a line of the form PLUGIN_LIB=lib-
       name [ : libname ] ...  .   Each  library  named  by  libname  will  be
       searched  for as if it were an option argument to builtin -f, and if it
       contains a built-in of the specified name this will be executed instead
       of  a  command  by this name.  Any built-in loaded from a library found
       this way will be associated with the directory  containing  the  .paths
       file so it will only execute if not found in an earlier directory.

       Finally,  the  directory  will be checked for a file of the given name.
       If the file has execute permission but is not  an  a.out  file,  it  is
       assumed  to  be  a file containing shell commands.  A separate shell is
       spawned to read it.  All non-exported variables  are  removed  in  this
       case.   If  the  shell command file doesn't have read permission, or if
       the setuid and/or setgid bits are set on the file, then the shell  exe-
       cutes  an  agent  whose job it is to set up the permissions and execute
       the shell with the shell command file passed down as an open file.   If
       the  .paths contains a line of the form name=value in the first or sec-
       ond line, then the environment variable name is modified by  prepending
       the  directory  specified  by value to the directory list.  If value is
       not an absolute directory, then it specifies a  directory  relative  to
       the  directory that the executable was found.  If the environment vari-
       able name does not already exist it will be added  to  the  environment
       list for the specified command.  A parenthesized command is executed in
       a sub-shell without removing non-exported variables.

   Command Re-entry.
       The text of the last HISTSIZE (default 512)  commands  entered  from  a
       terminal device is saved in a history file.  The file $HOME/.sh_history
       is used if the HISTFILE variable is not set or if the file it names  is
       not  writable.   A  shell  can  access  the commands of all interactive
       shells which use the same named HISTFILE.  The built-in command hist is
       used  to  list or edit a portion of this file.  The portion of the file
       to be edited or listed can be selected by number or by giving the first
       character  or  characters of the command.  A single command or range of
       commands can be specified.  If you do not specify an editor program  as
       an  argument  to  hist then the value of the variable HISTEDIT is used.
       If HISTEDIT is unset, the obsolete variable FCEDIT is used.  If  FCEDIT
       is not defined, then /bin/ed is used.  The edited command(s) is printed
       and re-executed upon leaving the editor unless you quit  without  writ-
       ing.   The  -s  option (and in obsolete versions, the editor name -) is
       used to skip the editing phase and to re-execute the command.  In  this
       case a substitution parameter of the form old=new can be used to modify
       the command before execution.  For example, with the  preset  alias  r,
       which  is  aliased  to ?hist -s?, typing 'r bad=good c' will re-execute
       the most recent command which starts with the letter c,  replacing  the
       first occurrence of the string bad with the string good.

   In-line Editing Options.
       Normally,  each  command  line entered from a terminal device is simply
       typed followed by a new-line ('RETURN' or 'LINE FEED').  If either  the
       emacs,  gmacs,  or  vi  option is active, the user can edit the command
       line.  To be in either  of  these  edit  modes  set  the  corresponding
       option.   An  editing  option  is  automatically selected each time the
       VISUAL or EDITOR variable is assigned a value ending in either of these
       option names.

       The  editing  features require that the user's terminal accept 'RETURN'
       as carriage return without line feed and that a space (' ') must  over-
       write the current character on the screen.

       Unless  the  multiline option is on, the editing modes implement a con-
       cept where the user is looking through a window at  the  current  line.
       The  window  width  is the value of COLUMNS if it is defined, otherwise
       80.  If the window width is too small to display the prompt  and  leave
       at  least  8  columns  to enter input, the prompt is truncated from the
       left.  If the line is longer than the window width minus two, a mark is
       displayed  at  the end of the window to notify the user.  As the cursor
       moves and reaches the window boundaries the  window  will  be  centered
       about  the  cursor.   The mark is a > (<, *) if the line extends on the
       right (left, both) side(s) of the window.

       The search commands in each edit mode provide  access  to  the  history
       file.   Only strings are matched, not patterns, although a leading ^ in
       the string restricts the match to begin at the first character  in  the
       line.

       Each  of  the edit modes has an operation to list the files or commands
       that match a partially entered word.  When applied to the first word on
       the  line,  or  the first word after a ;, |, &, or (, and the word does
       not begin with ~ or contain a /, the list of  aliases,  functions,  and
       executable  commands  defined by the PATH variable that could match the
       partial word is displayed.  Otherwise, the list of files that match the
       given  word  is displayed.  If the partially entered word does not con-
       tain any file expansion characters, a * is appended  before  generating
       these  lists.   After  displaying the generated list, the input line is
       redrawn.  These operations are called command  name  listing  and  file
       name  listing, respectively.  There are additional operations, referred
       to as command name completion and file name completion,  which  compute
       the  list  of  matching  commands or files, but instead of printing the
       list, replace the current word with a complete or partial  match.   For
       file  name  completion,  if the match is unique, a / is appended if the
       file is a directory and a space is appended if the file is not a direc-
       tory.   Otherwise, the longest common prefix for all the matching files
       replaces the word.  For command name completion, only  the  portion  of
       the  file  names  after the last / are used to find the longest command
       prefix.  If only a single name matches this prefix, then  the  word  is
       replaced  with  the command name followed by a space.  When using a tab
       for completion that does not yield a unique  match,  a  subsequent  tab
       will  provide  a  numbered  list  of matching alternatives.  A specific
       selection can be made by entering the selection number  followed  by  a
       tab.

   Key Bindings.
       The  KEYBD  trap  can  be  used to intercept keys as they are typed and
       change the characters that are actually seen by the shell.   This  trap
       is  executed  after  each character (or sequence of characters when the
       first character is ESC) is entered while reading from a terminal.   The
       variable  .sh.edchar contains the character or character sequence which
       generated the trap.  Changing the  value  of  .sh.edchar  in  the  trap
       action causes the shell to behave as if the new value were entered from
       the keyboard rather than the original value.

       The variable .sh.edcol is set to the input column number of the  cursor
       at  the  time of the input.  The variable .sh.edmode is set to ESC when
       in vi insert mode (see below) and is  null  otherwise.   By  prepending
       ${.sh.editmode}  to  a  value  assigned to .sh.edchar it will cause the
       shell to change to control mode if it is not already in this mode.

       This trap is not invoked for characters entered as arguments to editing
       directives, or while reading input for a character search.

   Emacs Editing Mode.
       This mode is entered by enabling either the emacs or gmacs option.  The
       only difference between these two modes is the way they handle ^T.   To
       edit,  the  user  moves  the cursor to the point needing correction and
       then inserts or deletes characters or words as needed.  All the editing
       commands  are control characters or escape sequences.  The notation for
       control characters is caret (^) followed by the character.   For  exam-
       ple,  ^F  is the notation for control F.  This is entered by depressing
       'f' while holding down the 'CTRL' (control) key.  The  'SHIFT'  key  is
       not depressed.  (The notation ^?  indicates the DEL (delete) key.)

       The  notation  for escape sequences is M- followed by a character.  For
       example, M-f (pronounced Meta f) is entered by  depressing  ESC  (ascii
       033)  followed  by 'f'.  (M-F would be the notation for ESC followed by
       'SHIFT' (capital) 'F'.)

       All edit commands operate from any place on the line (not just  at  the
       beginning).   Neither  the  'RETURN' nor the 'LINE FEED' key is entered
       after edit commands except when noted.

       ^F        Move cursor forward (right) one character.
       M-[C      Move cursor forward (right) one character.
       M-f       Move cursor forward one word.  (The emacs editor's idea of  a
                 word  is  a  string of characters consisting of only letters,
                 digits and underscores.)
       ^B        Move cursor backward (left) one character.
       M-[D      Move cursor backward (left) one character.
       M-b       Move cursor backward one word.
       ^A        Move cursor to start of line.
       M-[H      Move cursor to start of line.
       ^E        Move cursor to end of line.
       M-[Y      Move cursor to end of line.
       ^]char    Move cursor forward to character char on current line.
       M-^]char  Move cursor backward to character char on current line.
       ^X^X      Interchange the cursor and mark.
       erase     (User defined erase character as defined by the stty(1)  com-
                 mand, usually ^H or #.)  Delete previous character.
       lnext     (User  defined  literal  next  character  as  defined  by the
                 stty(1) command, or ^V if not  defined.)   Removes  the  next
                 character's editing features (if any).
       ^D        Delete current character.
       M-d       Delete current word.
       M-^H      (Meta-backspace) Delete previous word.
       M-h       Delete previous word.
       M-^?      (Meta-DEL)  Delete previous word (if your interrupt character
                 is ^?  (DEL, the default) then this command will not work).
       ^T        Transpose  current  character  with  previous  character  and
                 advance  the  cursor  in  emacs mode.  Transpose two previous
                 characters in gmacs mode.
       ^C        Capitalize current character.
       M-c       Capitalize current word.
       M-l       Change the current word to lower case.
       ^K        Delete from the cursor to the end of the line.   If  preceded
                 by a numerical parameter whose value is less than the current
                 cursor position, then delete from given position  up  to  the
                 cursor.   If preceded by a numerical parameter whose value is
                 greater than the current cursor position,  then  delete  from
                 cursor up to given cursor position.
       ^W        Kill from the cursor to the mark.
       M-p       Push the region from the cursor to the mark on the stack.
       kill      (User  defined kill character as defined by the stty command,
                 usually ^G or @.)  Kill the entire current line.  If two kill
                 characters  are  entered  in  succession, all kill characters
                 from then on cause a line feed (useful when using paper  ter-
                 minals).
       ^Y        Restore  last  item removed from line. (Yank item back to the
                 line.)
       ^L        Line feed and print current line.
       M-^L      Clear the screen.
       ^@        (Null character) Set mark.
       M-space   (Meta space) Set mark.
       ^J        (New line) Execute the current line.
       ^M        (Return) Execute the current line.
       eof       End-of-file character, normally ^D, is processed as  an  End-
                 of-file only if the current line is null.
       ^P        Fetch previous command.  Each time ^P is entered the previous
                 command back in time is accessed.  Moves back one  line  when
                 not on the first line of a multi-line command.
       M-[A      If  the cursor is at the end of the line, it is equivalent to
                 ^R with string set to the contents of the current line.  Oth-
                 erwise, it is equivalent to ^P.
       M-<       Fetch the least recent (oldest) history line.
       M->       Fetch the most recent (youngest) history line.
       ^N        Fetch  next  command  line.  Each time ^N is entered the next
                 command line forward in time is accessed.
       M-[B      Equivalent to ^N.
       ^Rstring  Reverse search history for a previous command line containing
                 string.   If a parameter of zero is given, the search is for-
                 ward.  String is terminated by a 'RETURN' or 'NEW LINE'.   If
                 string  is  preceded by a ^, the matched line must begin with
                 string.  If string is omitted, then  the  next  command  line
                 containing  the most recent string is accessed.  In this case
                 a parameter of zero reverses the direction of the search.
       ^O        Operate - Execute the current line and fetch  the  next  line
                 relative to current line from the history file.
       M-digits  (Escape)  Define numeric parameter, the digits are taken as a
                 parameter to the next command.  The commands  that  accept  a
                 parameter are ^F, ^B, erase, ^C, ^D, ^K, ^R, ^P, ^N, ^], M-.,
                 M-^], M-_, M-=, M-b, M-c, M-d, M-f, M-h, M-l and M-^H.
       M-letter  Soft-key - Your alias list is searched for an  alias  by  the
                 name  _letter  and  if  an alias of this name is defined, its
                 value will be inserted on the input queue.  The  letter  must
                 not be one of the above meta-functions.
       M-[letter Soft-key  -  Your  alias list is searched for an alias by the
                 name __letter and if an alias of this name  is  defined,  its
                 value  will be inserted on the input queue.  This can be used
                 to program function keys on many terminals.
       M-.       The last word of the previous  command  is  inserted  on  the
                 line.   If preceded by a numeric parameter, the value of this
                 parameter determines which word to  insert  rather  than  the
                 last word.
       M-_       Same as M-..
       M-*       Attempt  file name generation on the current word.  An aster-
                 isk is appended if the word doesn't match any file or contain
                 any special pattern characters.
       M-ESC     Command or file name completion as described above.
       ^I tab    Attempts  command or file name completion as described above.
                 If a partial completion occurs, repeating this will behave as
                 if  M-=  were entered.  If no match is found or entered after
                 space, a tab is inserted.
       M-=       If not preceded by a numeric parameter, it generates the list
                 of  matching commands or file names as described above.  Oth-
                 erwise, the word under the cursor is  replaced  by  the  item
                 corresponding  to the value of the numeric parameter from the
                 most recently generated command or file list.  If the  cursor
                 is not on a word, it is inserted instead.
       ^U        Multiply parameter of next command by 4.
       \         Escape next character.  Editing characters, the user's erase,
                 kill and interrupt (normally ^?)  characters may  be  entered
                 in  a  command line or in a search string if preceded by a \.
                 The \ removes the next character's editing features (if any).
       M-^V      Display version of the shell.
       M-#       If  the  line does not begin with a #, a # is inserted at the
                 beginning of the line and after each new-line, and  the  line
                 is entered.  This causes a comment to be inserted in the his-
                 tory file.  If the line begins with a #, the # is deleted and
                 one # after each new-line is also deleted.

   Vi Editing Mode.
       There  are  two  typing modes.  Initially, when you enter a command you
       are in the input mode.  To edit, the user enters control mode by typing
       ESC (033) and moves the cursor to the point needing correction and then
       inserts or deletes characters or words as needed.   Most  control  com-
       mands accept an optional repeat count prior to the command.

       When  in  vi  mode  on  most systems, canonical processing is initially
       enabled and the command will be echoed again if the speed is 1200  baud
       or greater and it contains any control characters or less than one sec-
       ond has elapsed since the prompt was printed.  The ESC character termi-
       nates  canonical  processing  for  the remainder of the command and the
       user can then modify the command line.  This scheme has the  advantages
       of canonical processing with the type-ahead echoing of raw mode.

       If  the option viraw is also set, the terminal will always have canoni-
       cal processing disabled.  This mode is implicit for systems that do not
       support  two  alternate  end of line delimiters, and may be helpful for
       certain terminals.

        Input Edit Commands
              By default the editor is in input mode.
              erase     (User defined erase character as defined by  the  stty
                        command, usually ^H or #.)  Delete previous character.
              ^W        Delete the previous blank  separated  word.   On  some
                        systems  the  viraw option may be required for this to
                        work.
              eof       As the first character of the line causes the shell to
                        terminate  unless the ignoreeof option is set.  Other-
                        wise this character is ignored.
              lnext     (User defined literal next character as defined by the
                        stty(1) or ^V if not defined.)  Removes the next char-
                        acter's editing features (if any).   On  some  systems
                        the viraw option may be required for this to work.
              \         Escape the next erase or kill character.
              ^I tab    Attempts  command or file name completion as described
                        above and returns to input mode.  If a partial comple-
                        tion  occurs,  repeating this will behave as if = were
                        entered from control mode.  If no match  is  found  or
                        entered after space, a tab is inserted.
        Motion Edit Commands
              These commands will move the cursor.
              [count]l  Cursor forward (right) one character.
              [count][C Cursor forward (right) one character.
              [count]w  Cursor forward one alpha-numeric word.
              [count]W  Cursor  to the beginning of the next word that follows
                        a blank.
              [count]e  Cursor to end of word.
              [count]E  Cursor to end of the current blank delimited word.
              [count]h  Cursor backward (left) one character.
              [count][D Cursor backward (left) one character.
              [count]b  Cursor backward one word.
              [count]B  Cursor to preceding blank separated word.
              [count]|  Cursor to column count.
              [count]fc Find the next character c in the current line.
              [count]Fc Find the previous character c in the current line.
              [count]tc Equivalent to f followed by h.
              [count]Tc Equivalent to F followed by l.
              [count];  Repeats count times, the last  single  character  find
                        command, f, F, t, or T.
              [count],  Reverses  the last single character find command count
                        times.
              0         Cursor to start of line.
              ^         Cursor to start of line.
              [H        Cursor to first non-blank character in line.
              $         Cursor to end of line.
              [Y        Cursor to end of line.
              %         Moves to balancing (, ), {, }, [, or ].  If cursor  is
                        not  on  one of the above characters, the remainder of
                        the line is searched for the first occurrence  of  one
                        of the above characters first.
        Search Edit Commands
              These commands access your command history.
              [count]k  Fetch  previous  command.   Each time k is entered the
                        previous command back in time is accessed.
              [count]-  Equivalent to k.
              [count][A If cursor is at the end of the line it  is  equivalent
                        to  /  with  string^set to the contents of the current
                        line.  Otherwise, it is equivalent to k.
              [count]j  Fetch next command.  Each time j is entered  the  next
                        command forward in time is accessed.
              [count]+  Equivalent to j.
              [count][B Equivalent to j.
              [count]G  The  command  number count is fetched.  The default is
                        the least recent history command.
              /string   Search backward through history for a previous command
                        containing string.  String is terminated by a 'RETURN'
                        or 'NEW LINE'.  If string is  preceded  by  a  ^,  the
                        matched  line  must  begin  with string.  If string is
                        null, the previous string will be used.
              ?string   Same as / except that search will be  in  the  forward
                        direction.
              n         Search  for  next  match of the last pattern to / or ?
                        commands.
              N         Search for next match of the last pattern to /  or  ?,
                        but in reverse direction.
        Text Modification Edit Commands
              These commands will modify the line.
              a         Enter  input  mode  and  enter  text after the current
                        character.
              A         Append text to the end of the line.  Equivalent to $a.
              [count]cmotion
              c[count]motion
                        Delete  current  character  through the character that
                        motion would move the cursor to and enter input  mode.
                        If  motion  is  c, the entire line will be deleted and
                        input mode entered.
              C         Delete the current character through the end  of  line
                        and enter input mode.  Equivalent to c$.
              S         Equivalent to cc.
              [count]s  Replace characters under the cursor in input mode.
              D         Delete  the current character through the end of line.
                        Equivalent to d$.
              [count]dmotion
              d[count]motion
                        Delete current character through  the  character  that
                        motion  would  move  to.   If motion is d , the entire
                        line will be deleted.
              i         Enter input mode and insert text  before  the  current
                        character.
              I         Insert text before the beginning of the line.  Equiva-
                        lent to 0i.
              [count]P  Place the previous text modification before  the  cur-
                        sor.
              [count]p  Place the previous text modification after the cursor.
              R         Enter input mode and replace characters on the  screen
                        with characters you type overlay fashion.
              [count]rc Replace the count character(s) starting at the current
                        cursor position with c, and advance the cursor.
              [count]x  Delete current character.
              [count]X  Delete preceding character.
              [count].  Repeat the previous text modification command.
              [count]~  Invert the case of the count character(s) starting  at
                        the current cursor position and advance the cursor.
              [count]_  Causes  the  count  word of the previous command to be
                        appended and input mode entered.   The  last  word  is
                        used if count is omitted.
              *         Causes  an  *  to  be appended to the current word and
                        file name generation attempted.  If no match is found,
                        it rings the bell.  Otherwise, the word is replaced by
                        the matching pattern and input mode is entered.
              \         Command or file name completion as described above.
        Other Edit Commands
              Miscellaneous commands.
              [count]ymotion
              y[count]motion
                        Yank current character through character  that  motion
                        would move the cursor to and puts them into the delete
                        buffer.  The text and cursor are unchanged.
              yy        Yanks the entire line.
              Y         Yanks from current position to end of  line.   Equiva-
                        lent to y$.
              u         Undo the last text modifying command.
              U         Undo  all the text modifying commands performed on the
                        line.
              [count]v  Returns the command hist  -e  ${VISUAL:-${EDITOR:-vi}}
                        count  in the input buffer.  If count is omitted, then
                        the current line is used.
              ^L        Line feed and print current line.  Has effect only  in
                        control mode.
              ^J        (New line)  Execute  the  current  line, regardless of
                        mode.
              ^M        (Return) Execute the current line, regardless of mode.
              #         If  the  first  character  of the command is a #, then
                        this command deletes this # and each # that follows  a
                        newline.   Otherwise, sends the line after inserting a
                        # in front of each line in the  command.   Useful  for
                        causing the current line to be inserted in the history
                        as a comment  and  uncommenting  previously  commented
                        commands in the history file.
              [count]=  If  count  is  not specified, it generates the list of
                        matching commands or file names  as  described  above.
                        Otherwise,  the  word under the the cursor is replaced
                        by the count item from  the  most  recently  generated
                        command or file list.  If the cursor is not on a word,
                        it is inserted instead.
              @letter   Your alias list is searched for an alias by  the  name
                        _letter  and  if an alias of this name is defined, its
                        value will be inserted on the input queue for process-
                        ing.
              ^V        Display version of the shell.

   Built-in Commands.
       The  following  simple-commands  are  executed  in  the  shell process.
       Input/Output redirection is permitted.  Unless otherwise indicated, the
       output  is written on file descriptor 1 and the exit status, when there
       is no syntax error, is zero.  Except for :, true, false, echo,  newgrp,
       and  login, all built-in commands accept -- to indicate end of options.
       They also interpret the option --man as a request to  display  the  man
       page onto standard error and -?  as a help request which prints a usage
       message on standard error.  Commands that are preceded by one or two  +
       symbols  are special built-in commands and are treated specially in the
       following ways:
       1.     Variable assignment lists preceding the command remain in effect
              when the command completes.
       2.     I/O redirections are processed after variable assignments.
       3.     Errors cause a script that contains them to abort.
       4.     They are not valid function names.
       5.     Words  following a command preceded by ++ that are in the format
              of a variable assignment are expanded with the same rules  as  a
              variable  assignment.   This  means  that  tilde substitution is
              performed after the = sign and field  splitting  and  file  name
              generation  are  not  performed.   These  are called declaration
              built-ins.

       + : [ arg ... ]
              The command only expands parameters.

       + . name [ arg ... ]
              If name is a function defined with the  function  name  reserved
              word syntax, the function is executed in the current environment
              (as if it had been defined with the name()  syntax.)   Otherwise
              if  name  refers to a file, the file is read in its entirety and
              the commands are executed in the current shell environment.  The
              search path specified by PATH is used to find the directory con-
              taining the file.  If any arguments arg are given,  they  become
              the  positional  parameters  while processing the .  command and
              the original positional parameters are restored upon completion.
              Otherwise  the  positional  parameters  are unchanged.  The exit
              status is the exit status of the last command executed.

       ++ alias [ -ptx ]  [ name[ =value  ] ] ...
              alias with no arguments prints the list of aliases in  the  form
              name=value  on  standard  output.  The -p option causes the word
              alias to be inserted before each one.  When one  or  more  argu-
              ments  are  given, an alias is defined for each name whose value
              is given.  A trailing space in value causes the next word to  be
              checked  for alias substitution.  The obsolete -t option is used
              to set and list tracked aliases.  The value of a  tracked  alias
              is the full pathname corresponding to the given name.  The value
              becomes undefined when the value of PATH is reset but the  alias
              remains  tracked.   Without  the -t option, for each name in the
              argument list for which no value is given, the name and value of
              the  alias  is  printed.   The obsolete -x option has no effect.
              The exit status is non-zero if a name is given,  but  no  value,
              and no alias has been defined for the name.

       bg [ job... ]
              This  command is only on systems that support job control.  Puts
              each specified job into the background.  The current job is  put
              in  the  background  if  job  is  not specified.  See Jobs for a
              description of the format of job.

       + break [ n ]
              Exit from the enclosing for, while, until, or  select  loop,  if
              any.  If n is specified, then break n levels.

       builtin [ -ds ] [ -f file ] [ name ... ]
              If  name  is  not  specified, and no -f option is specified, the
              built-ins are printed on standard output.  The -s option  prints
              only the special built-ins.  Otherwise, each name represents the
              pathname whose basename is the name of the built-in.  The  entry
              point function name is determined by prepending b_ to the built-
              in name.  A built-in specified by a pathname will only  be  exe-
              cuted  when that pathname would be found during the path search.
              Built-ins found in libraries loaded via the .paths file will  be
              associate  with  the  pathname  of  the directory containing the
              .paths file.

       The ISO C/C++ prototype is b_mycommand(int  argc,  char  *argv[],  void
       *context)  for  the builtin command mycommand where argv is array an of
       argc elements and context is an optional pointer to a Shell_t structure
       as described in <ast/shell.h>.
       Special  built-ins  cannot  be  bound to a pathname or deleted.  The -d
       option deletes each of the given built-ins.  On  systems  that  support
       dynamic  loading,  the  -f option names a shared library containing the
       code for built-ins.  The shared library  prefix  and/or  suffix,  which
       depend  on  the  system, can be omitted.  Once a library is loaded, its
       symbols become available for subsequent invocations of builtin.  Multi-
       ple libraries can be specified with separate invocations of the builtin
       command.  Libraries are searched in the reverse order in which they are
       specified.   When  a  library is loaded, it looks for a function in the
       library whose name is lib_init() and  invokes  this  function  with  an
       argument of 0.

       cd [ -LP ] [ arg ]
       cd [ -LP ] old new
              This  command  can be in either of two forms.  In the first form
              it changes the current directory to arg.  If arg is - the direc-
              tory  is  changed to the previous directory.  The shell variable
              HOME is the default arg.  The variable PWD is set to the current
              directory.   The  shell  variable CDPATH defines the search path
              for the directory containing arg.  Alternative  directory  names
              are separated by a colon (:).  The default path is <null> (spec-
              ifying the current directory).  Note that the current  directory
              is  specified  by a null path name, which can appear immediately
              after the equal sign or between the  colon  delimiters  anywhere
              else  in  the path list.  If arg begins with a / then the search
              path is not used.  Otherwise, each  directory  in  the  path  is
              searched for arg.
              The  second form of cd substitutes the string new for the string
              old in the current directory name, PWD, and tries to  change  to
              this new directory.
              By default, symbolic link names are treated literally when find-
              ing the directory name.  This is equivalent to  the  -L  option.
              The  -P  option causes symbolic links to be resolved when deter-
              mining the directory.  The last instance of -L or -P on the com-
              mand line determines which method is used.
              The cd command may not be executed by rksh.  rksh93.

       command [ -pvxV ] name [ arg ... ]
              Without  the  -v  or  -V options, command executes name with the
              arguments given by arg.  The -p option causes a default path  to
              be  searched  rather  than the one defined by the value of PATH.
              Functions will not be searched for when finding name.  In  addi-
              tion,  if name refers to a special built-in, none of the special
              properties associated with the leading daggers will be  honored.
              (For  example, the predefined alias redirect=?command exec? pre-
              vents a script from terminating when an invalid  redirection  is
              given.)   With  the -x option, if command execution would result
              in a failure because there are too many arguments, errno  E2BIG,
              the  shell will invoke command name multiple times with a subset
              of the arguments on each invocation.  Arguments that occur prior
              to  the  first word that expands to multiple arguments and after
              the last word that expands to multiple arguments will be  passed
              on each invocation.  The exit status will be the maximum invoca-
              tion exit status.  With the -v option, command is equivalent  to
              the  built-in  whence  command  described  below.  The -V option
              causes command to act like whence -v.

       + continue [ n ]
              Resume the next iteration of the enclosing for, while, until, or
              select loop.  If n is specified, then resume at the n-th enclos-
              ing loop.

       disown [ job... ]
              Causes the shell not to send a HUP signal to each given job,  or
              all  active  jobs  if  job is omitted, when a login shell termi-
              nates.

       echo [ arg ... ]
              When the first arg does not begin with a  -,  and  none  of  the
              arguments  contain  a  \, then echo prints each of its arguments
              separated by a space and terminated by a  new-line.   Otherwise,
              the  behavior  of  echo  is system dependent and print or printf
              described below should be  used.   See  echo(1)  for  usage  and
              description.

       ++ enum [ -i  ] type[=(value ...) ]
              Creates a declaration command named type that is an integer type
              that allows one of the specified values  as  enumeration  names.
              If  =(value ...)  is omitted, then type must be an indexed array
              variable with at least two elements and  the  values  are  taken
              from  this  array  variable.   If -i is specified the values are
              case insensitive.

       + eval [ arg ... ]
              The arguments are read as input to the shell and  the  resulting
              command(s) executed.

       + exec [ -c ] [ -a name ] [ arg ... ]
              If  arg is given, the command specified by the arguments is exe-
              cuted in place of this shell without  creating  a  new  process.
              The -c option causes the environment to be cleared before apply-
              ing variable assignments associated with  the  exec  invocation.
              The  -a  option causes name rather than the first arg, to become
              argv[0] for the new process.  Input/output arguments may  appear
              and affect the current process.  If arg is not given, the effect
              of this command is to modify file descriptors as  prescribed  by
              the  input/output  redirection  list.   In  this  case, any file
              descriptor numbers greater than 2  that  are  opened  with  this
              mechanism are closed when invoking another program.

       + exit [ n ]
              Causes  the  shell  to exit with the exit status specified by n.
              The value will be the least significant 8 bits of the  specified
              status.   If  n  is omitted, then the exit status is that of the
              last command executed.  An end-of-file will also cause the shell
              to  exit  except for a shell which has the ignoreeof option (see
              set below) turned on.

       ++ export [ -p ] [ name[=value] ] ...
              If name is not given, the names and values of each variable with
              the  export  attribute  are  printed with the values quoted in a
              manner that allows them to be re-input.  The export  command  is
              the  same  as  typeset -x except that if you use export within a
              function, no local variable is created.  The  -p  option  causes
              the  word export to be inserted before each one.  Otherwise, the
              given names are marked for automatic export to  the  environment
              of subsequently-executed commands.

       false  Does nothing, and exits 1. Used with until for infinite loops.

       fg [ job... ]
              This  command is only on systems that support job control.  Each
              job specified is brought to the foreground and waited for in the
              specified order.  Otherwise, the current job is brought into the
              foreground.  See Jobs for a description of the format of job.

       getconf [ name [ pathname ] ]
              Prints the current value of the configuration parameter given by
              name.   The  configuration  parameters  are  defined by the IEEE
              POSIX 1003.1 and IEEE POSIX 1003.2 standards.  (See  pathconf(2)
              and  sysconf(2).)  The pathname argument is required for parame-
              ters whose value depends on the location in the file system.  If
              no  arguments  are given, getconf prints the names and values of
              the current configuration parameters.  The pathname  /  is  used
              for each of the parameters that requires pathname.

       getopts [  -a name ] optstring vname [ arg ... ]
              Checks arg for legal options.  If arg is omitted, the positional
              parameters are used.  An option argument begins with a + or a -.
              An  option not beginning with + or - or the argument -- ends the
              options.  Options beginning with + are only recognized when opt-
              string  begins  with  a  +.  optstring contains the letters that
              getopts recognizes.  If a letter is followed by a :, that option
              is  expected  to have an argument.  The options can be separated
              from the argument by blanks.  The option -?  causes  getopts  to
              generate a usage message on standard error.  The -a argument can
              be used to specify the name to use for the usage message,  which
              defaults to $0.
              getopts  places  the next option letter it finds inside variable
              vname each time it  is  invoked.   The  option  letter  will  be
              prepended  with  a + when arg begins with a +.  The index of the
              next arg is stored in OPTIND.  The option argument, if any, gets
              stored in OPTARG.
              A  leading  : in optstring causes getopts to store the letter of
              an invalid option in OPTARG, and to  set  vname  to  ?   for  an
              unknown option and to : when a required option argument is miss-
              ing.  Otherwise, getopts prints an error message.  The exit sta-
              tus is non-zero when there are no more options.
              There is no way to specify any of the options :, +, -, ?, [, and
              ].  The option # can only be specified as the first option.

       hist [ -e ename  ] [ -nlr ] [ first [ last ] ]
       hist -s  [ old=new ] [ command ]
              In the first form, a range of commands from  first  to  last  is
              selected  from the last HISTSIZE commands that were typed at the
              terminal.  The arguments first and last may be  specified  as  a
              number  or  as  a  string.   A string is used to locate the most
              recent command starting with the given string.  A negative  num-
              ber  is used as an offset to the current command number.  If the
              -l option is selected, the commands are listed on standard  out-
              put.   Otherwise,  the editor program ename is invoked on a file
              containing these keyboard commands.  If ename is  not  supplied,
              then the value of the variable HISTEDIT is used.  If HISTEDIT is
              not set, then FCEDIT (default /bin/ed) is used  as  the  editor.
              When  editing  is complete, the edited command(s) is executed if
              the changes have been saved.  If last is not specified, then  it
              will be set to first.  If first is not specified, the default is
              the previous command for  editing  and  -16  for  listing.   The
              option  -r  reverses the order of the commands and the option -n
              suppresses command numbers when listing.  In  the  second  form,
              command  is interpreted as first described above and defaults to
              the last command executed.  The resulting  command  is  executed
              after the optional substitution old=new is performed.

       jobs [ -lnp ] [ job ... ]
              Lists  information  about  each given job; or all active jobs if
              job is omitted.  The -l option lists process ids in addition  to
              the  normal  information.  The -n option only displays jobs that
              have stopped or exited  since  last  notified.   The  -p  option
              causes  only  the  process  group  to be listed.  See Jobs for a
              description of the format of job.

       kill [ -s signame ] job ...
       kill [ -n signum ] job ...
       kill -Ll [ sig ... ]
              Sends either the TERM (terminate) signal or the specified signal
              to the specified jobs or processes.  Signals are either given by
              number with the -n option or by name  with  the  -s  option  (as
              given  in  <signal.h>,  stripped  of the prefix ''SIG'' with the
              exception that SIGCLD is named CHLD).  For backward  compatibil-
              ity,  the  n  and s can be omitted and the number or name placed
              immediately after the -.  If the signal being sent is TERM (ter-
              minate)  or HUP (hangup), then the job or process will be sent a
              CONT (continue) signal if it is stopped.  The argument  job  can
              be  the  process  id of a process that is not a member of one of
              the active jobs.  See Jobs for a description of  the  format  of
              job.   In  the  third  form,  kill -l, or kill -L, if sig is not
              specified, the signal names are listed.  The -l option list only
              the  signal names.  -L options lists each signal name and corre-
              sponding number.  Otherwise, for each sig that is  a  name,  the
              corresponding  signal  number is listed.  For each sig that is a
              number, the signal name corresponding to the least significant 8
              bits of sig is listed.

       let arg ...
              Each  arg  is  a separate arithmetic expression to be evaluated.
              let only recognizes octal constants starting with 0 when the set
              option  letoctal  is on.  See Arithmetic Evaluation above, for a
              description of arithmetic expression evaluation.
              The exit status is 0 if the value of the last expression is non-
              zero, and 1 otherwise.

       + newgrp [ arg ... ]
              Equivalent to exec /bin/newgrp arg ....

       print [ -CRenprsv ] [ -u unit] [ -f format ] [ arg ... ]
              With  no  options or with option - or --, each arg is printed on
              standard output.  The -f  option  causes  the  arguments  to  be
              printed  as  described  by printf.  In this case, any e, n, r, R
              options are ignored.  Otherwise, unless the -C, -R,  -r,  or  -v
              are specified, the following escape conventions will be applied:
              \a     The alert character (ascii 07).
              \b     The backspace character (ascii 010).
              \c     Causes print to end without processing more arguments and
                     not adding a new-line.
              \f     The formfeed character (ascii 014).
              \n     The new-line character (ascii 012).
              \r     The carriage return character (ascii 015).
              \t     The tab character (ascii 011).
              \v     The vertical tab character (ascii 013).
              \E     The escape character (ascii 033).
              \\     The backslash character \.
              \0x    The  character  defined  by  the  1,  2, or 3-digit octal
                     string given by x.

              The -R option will print all subsequent  arguments  and  options
              other than -n.  The -e causes the above escape conventions to be
              applied.  This is the default behavior.  It reverses the  effect
              of  an  earlier  -r.   The  -p option causes the arguments to be
              written onto the pipe of the process spawned with |& instead  of
              standard  output.   The  -v option treats each arg as a variable
              name and writes the value in  the  printf  %B  format.   The  -C
              option  treats  each arg as a variable name and writes the value
              in the printf %#B format.  The -s option causes the arguments to
              be  written  onto  the  history file instead of standard output.
              The -u option can be used to specify a one digit file descriptor
              unit  number  unit  on  which  the  output  will be placed.  The
              default is 1.  If the option -n is used, no new-line is added to
              the output.

       printf format [ arg ... ]
              The  arguments  arg are printed on standard output in accordance
              with the ANSI-C formatting  rules  associated  with  the  format
              string format.  If the number of arguments exceeds the number of
              format specifications, the format string  is  reused  to  format
              remaining arguments.  The following extensions can also be used:
              %b     A %b format can be used instead of  %s  to  cause  escape
                     sequences  in  the  corresponding  arg  to be expanded as
                     described in print.
              %B     A %B option causes each of the arguments to be treated as
                     variable  names  and the binary value of variable will be
                     printed.  The alternate flag # causes a compound variable
                     to  be  output on a single line.  This is most useful for
                     compound variables and variables whose attribute is -b.
              %H     A %H format can be used instead of %s to cause characters
                     in  arg  that are special in HTML and XML to be output as
                     their entity name.  The alternate flag # formats the out-
                     put for use as a URI.
              %P     A  %P format can be used instead of %s to cause arg to be
                     interpreted as an  extended  regular  expression  and  be
                     printed as a shell pattern.
              %R     A  %R format can be used instead of %s to cause arg to be
                     interpreted as a shell pattern and to be  printed  as  an
                     extended regular expression.
              %q     A  %q  format  can  be  used  instead  of %s to cause the
                     resulting string to be quoted in a  manner  than  can  be
                     reinput to the shell.  When q is preceded by the alterna-
                     tive format specifier, #, the string is quoted in  manner
                     suitable as a field in a .csv format file.
              %(date-format)T
                     A  %(date-format)T format can be use to treat an argument
                     as a date/time string and to format the date/time accord-
                     ing  to  the  date-format as defined for the date(1) com-
                     mand.
              %Z     A %Z format will output a byte whose value is 0.
              %d     The precision field of the %d format can be followed by a
                     .  and the output base.  In this case, the # flag charac-
                     ter causes base# to be prepended.
              #      The # flag, when used with the %d format without an  out-
                     put base, displays the output in powers of 1000 indicated
                     by one of the following suffixes: k M G T P E,  and  when
                     used  with the %i format displays the output in powers of
                     1024 indicated by one of the following suffixes: Ki Mi Gi
                     Ti Pi Ei.
              =      The  = flag centers the output within the specified field
                     width.
              L      The L flag, when used with the %c or %s  formats,  treats
                     precision as character width instead of byte count.
              ,      The  ,  flag,  when used with the %d or %f formats, sepa-
                     rates groups of digits with the grouping delimiter (,  on
                     groups of 3 in the C locale.)


       pwd [ -LP ]
              Outputs  the  value  of  the  current working directory.  The -L
              option is the default; it prints the logical name of the current
              directory.   If  the  -P option is given, all symbolic links are
              resolved from the name.  The last instance of -L or  -P  on  the
              command line determines which method is used.

       read  [  -ACSprsv  ] [ -d delim] [ -n n] [ [ -N n] [ [ -t timeout] [ -u
       unit] [ vname?prompt ] [ vname ... ]
              The  shell  input  mechanism.  One line is read and is broken up
              into fields using the characters  in  IFS  as  separators.   The
              escape  character,  \, is used to remove any special meaning for
              the next character and for line  continuation.   The  -d  option
              causes  the  read  to  continue  to the first character of delim
              rather than new-line.  The -n option causes at most n  bytes  to
              read rather a full line but will return when reading from a slow
              device as soon as any characters have been read.  The -N  option
              causes  exactly  n  to  be  read  unless an end-of-file has been
              encountered or the read times out because of the -t option.   In
              raw  mode,  -r,  the  \ character is not treated specially.  The
              first field is assigned to the first vname, the second field  to
              the  second  vname,  etc.,  with leftover fields assigned to the
              last vname.  When vname has the binary attribute and -n or -N is
              specified,  the bytes that are read are stored directly into the
              variable.  If the -v is specified, then the value of  the  first
              vname will be used as a default value when reading from a termi-
              nal device.  The -A option causes the variable vname to be unset
              and  each field that is read to be stored in successive elements
              of the indexed array vname.  The -C option causes  the  variable
              vname to be read as a compound variable.  Blanks will be ignored
              when finding the beginning  open  parenthesis.   The  -S  option
              causes  the  line  to  be treated like a record in a .csv format
              file so that double quotes can be used to  allow  the  delimiter
              character  and  the new-line character to appear within a field.
              The -p option causes the input line to be taken from  the  input
              pipe  of  a  process  spawned  by the shell using |&.  If the -s
              option is present, the input will be saved as a command  in  the
              history  file.  The option -u can be used to specify a one digit
              file descriptor unit unit to read from.  The file descriptor can
              be  opened  with the exec special built-in command.  The default
              value of unit n is 0.  The option -t is used to specify a  time-
              out  in  seconds when reading from a terminal or pipe.  If vname
              is omitted, then REPLY is used as the default vname.  An end-of-
              file  with the -p option causes cleanup for this process so that
              another can be spawned.  If the first argument contains a ?, the
              remainder  of  this  word  is used as a prompt on standard error
              when the shell is interactive.  The exit status is 0  unless  an
              end-of-file is encountered or read has timed out.

       ++ readonly [ -p ] [ vname[=value] ] ...
              If  vname  is  not  given, the names and values of each variable
              with the readonly attribute is printed with the values quoted in
              a  manner  that  allows  them  to be re-inputted.  The -p option
              causes the word readonly to be inserted before each one.  Other-
              wise,  the given vnames are marked readonly and these names can-
              not be changed by subsequent assignment.  When defining a  type,
              if the value of a readonly sub-variable is not defined the value
              is required when creating each instance.

       + return [ n ]
              Causes a shell function or .  script to return to  the  invoking
              script  with  the exit status specified by n.  The value will be
              the least significant 8 bits of the specified status.  If  n  is
              omitted, then the return status is that of the last command exe-
              cuted.  If return is invoked while not in  a  function  or  a  .
              script, then it behaves the same as exit.

       +  set  [  ?BCGabefhkmnoprstuvx ] [ ?o [ option ] ] ... [ ?A vname ]  [
       arg ... ]
              The options for this command have meaning as follows:
              -A      Array  assignment.   Unset the variable vname and assign
                      values sequentially from the arg list.  If +A  is  used,
                      the variable vname is not unset first.
              -B      Enable  brace  pattern  field  generation.   This is the
                      default behavior.
              -B      Enable brace group expansion.  On by default.
              -C      Prevents redirection > from truncating  existing  files.
                      Files  that are created are opened with the O_EXCL mode.
                      Requires >| to truncate a file when turned on.
              -G      Causes the pattern ** by itself to match files and  zero
                      or  more  directories  and sub-directories when used for
                      file name generation.  If followed by a / only  directo-
                      ries and sub-directories are matched.
              -a      All  subsequent variables that are defined are automati-
                      cally exported.
              -b      Prints job completion messages as soon as  a  background
                      job  changes  state  rather  than  waiting  for the next
                      prompt.
              -e      Unless contained in a || or && command, or  the  command
                      following  an  if  while  or  until  command  or  in the
                      pipeline following !, if a command has a  non-zero  exit
                      status,  execute  the  ERR trap, if set, and exit.  This
                      mode is disabled while reading profiles.
              -f      Disables file name generation.
              -h      Each command becomes a tracked alias when first  encoun-
                      tered.
              -k      (Obsolete). All variable assignment arguments are placed
                      in the environment for a command, not  just  those  that
                      precede the command name.
              -m      Background jobs will run in a separate process group and
                      a line will print upon completion.  The exit  status  of
                      background jobs is reported in a completion message.  On
                      systems with job control, this option is turned on auto-
                      matically for interactive shells.
              -n      Read  commands  and check them for syntax errors, but do
                      not execute them.  Ignored for interactive shells.
              -o      The following argument  can  be  one  of  the  following
                      option names:
                      allexport
                              Same as -a.
                      errexit Same as -e.
                      bgnice  All background jobs are run at a lower priority.
                              This is the default mode.
                      braceexpand
                              Same as -B.
                      emacs   Puts you in an emacs style  in-line  editor  for
                              command entry.
                      globstar
                              Same as -G.
                      gmacs   Puts  you  in  a  gmacs style in-line editor for
                              command entry.
                      ignoreeof
                              The shell will not  exit  on  end-of-file.   The
                              command exit must be used.
                      keyword Same as -k.
                      letoctal
                              The  let command allows octal constants starting
                              with 0.
                      markdirs
                              All directory names  resulting  from  file  name
                              generation have a trailing / appended.
                      monitor Same as -m.
                      multiline
                              The  built-in editors will use multiple lines on
                              the screen for lines that are  longer  than  the
                              width  of the screen.  This may not work for all
                              terminals.
                      noclobber
                              Same as -C.
                      noexec  Same as -n.
                      noglob  Same as -f.
                      nolog   Do not save function definitions in the  history
                              file.
                      notify  Same as -b.
                      nounset Same as -u.
                      pipefail
                              A  pipeline  will  not complete until all compo-
                              nents of the pipeline have  completed,  and  the
                              return  value will be the value of the last non-
                              zero command to fail or zero if no  command  has
                              failed.
                      showme  When  enabled, simple commands or pipelines pre-
                              ceded by a semicolon (;) will be displayed as if
                              the  xtrace  option were enabled but will not be
                              executed.  Otherwise,  the  leading  ;  will  be
                              ignored.
                      privileged
                              Same as -p.
                      verbose Same as -v.
                      trackall
                              Same as -h.
                      vi      Puts  you  in  insert mode of a vi style in-line
                              editor until you hit the escape  character  033.
                              This  puts  you in control mode.  A return sends
                              the line.
                      viraw   Each character is processed as it is typed in vi
                              mode.
                      xtrace  Same as -x.
                      If  no  option name is supplied, then the current option
                      settings are printed.
              -p      Disables processing of the $HOME/.profile file and  uses
                      the  file  /etc/suid_profile  instead  of  the ENV file.
                      This mode is on whenever the effective uid (gid) is  not
                      equal  to  the  real uid (gid).  Turning this off causes
                      the effective uid and gid to be set to the real uid  and
                      gid.
              -r      Enables  the  restricted  shell.   This option cannot be
                      unset once set.
              -s      Sort the positional parameters lexicographically.
              -t      (Obsolete).  Exit after reading and executing  one  com-
                      mand.
              -u      Treat unset parameters as an error when substituting.
              -v      Print shell input lines as they are read.
              -x      Print commands and their arguments as they are executed.
              --      Do not change any of the options; useful in  setting  $1
                      to  a  value  beginning  with -.  If no arguments follow
                      this option then the positional parameters are unset.

              As an obsolete feature, if the first arg is - then the -x and -v
              options  are turned off and the next arg is treated as the first
              argument.  Using + rather than -  causes  these  options  to  be
              turned  off.   These options can also be used upon invocation of
              the shell.  The current set of  options  may  be  found  in  $-.
              Unless  -A  is specified, the remaining arguments are positional
              parameters and are assigned, in order, to  $1  $2  ....   If  no
              arguments  are given, then the names and values of all variables
              are printed on the standard output.

       + shift [ n ]
              The positional parameters from $n+1 ...  are renamed  $1  ...  ,
              default  n  is 1.  The parameter n can be any arithmetic expres-
              sion that evaluates to a non-negative number less than or  equal
              to $#.

       sleep seconds
              Suspends  execution  for  the number of decimal seconds or frac-
              tions of a second given by seconds.

       + trap [ -p ] [ action ] [ sig ] ...
              The -p option causes the trap action associated with  each  trap
              as  specified  by  the  arguments to be printed with appropriate
              quoting.  Otherwise, action will be processed as if it  were  an
              argument  to  eval  when the shell receives signal(s) sig.  Each
              sig can be given as a number or as the name of the signal.  Trap
              commands are executed in order of signal number.  Any attempt to
              set a trap on a signal that was ignored on entry to the  current
              shell is ineffective.  If action is omitted and the first sig is
              a number, or if action is -, then the trap(s) for each  sig  are
              reset  to  their  original values.  If action is the null string
              then this signal is ignored by the shell and by the commands  it
              invokes.   If sig is ERR then action will be executed whenever a
              command has a non-zero exit status.  If sig is DEBUG then action
              will  be executed before each command.  The variable .sh.command
              will contain the contents  of  the  current  command  line  when
              action is running.  If the exit status of the trap is 2 the com-
              mand will not be executed.  If the exit status of  the  trap  is
              255  and  inside a function or a dot script, the function or dot
              script will return.  If sig is 0 or EXIT and the trap  statement
              is executed inside the body of a function defined with the func-
              tion name syntax, then the command action is executed after  the
              function  completes.  If sig is 0 or EXIT for a trap set outside
              any function then the command action is executed  on  exit  from
              the  shell.  If sig is KEYBD, then action will be executed when-
              ever a key is read while in emacs, gmacs, or vi mode.  The  trap
              command  with  no arguments prints a list of commands associated
              with each signal number.

       An exit or return without an argument in a trap  action  will  preserve
       the exit status of the command that invoked the trap.

       true   Does nothing, and exits 0. Used with while for infinite loops.

       ++ typeset [ ?ACHSfblmnprtux ] [ ?EFLRXZi[n] ]   [ +-M  [ mapname ] ] [
       -T  [ tname=(assign_list) ] ] [ -h str ] [ -a [type] ] [ vname[=value ]
        ] ...
              Sets  attributes  and  values for shell variables and functions.
              When invoked inside a function defined with  the  function  name
              syntax, a new instance of the variable vname is created, and the
              variable's value and type are restored when  the  function  com-
              pletes.  The following list of attributes may be specified:
              -A     Declares  vname  to  be an associative array.  Subscripts
                     are strings rather than arithmetic expressions.
              -C     causes each vname to be a compound variable.  value names
                     a  compound variable it is copied into vname.  Otherwise,
                     it unsets each vname.
              -a     Declares vname to be an indexed array.  If type is speci-
                     fied,  it must be the name of an enumeration type created
                     with the enum command and it allows enumeration constants
                     to be used as subscripts.
              -E     Declares  vname  to  be a double precision floating point
                     number.  If n is non-zero, it defines the number of  sig-
                     nificant  figures  that  are  used  when expanding vname.
                     Otherwise, ten significant figures will be used.
              -F     Declares vname to be a double  precision  floating  point
                     number.   If  n  is  non-zero,  it  defines the number of
                     places after the decimal point that are used when expand-
                     ing  vname.  Otherwise ten places after the decimal point
                     will be used.
              -H     This option provides UNIX to host-name  file  mapping  on
                     non-UNIX machines.
              -L     Left  justify and remove leading blanks from value.  If n
                     is non-zero, it defines the width of the field, otherwise
                     it  is  determined  by  the  width  of the value of first
                     assignment.  When the variable  is  assigned  to,  it  is
                     filled  on  the right with blanks or truncated, if neces-
                     sary, to fit into the field.  The  -R  option  is  turned
                     off.
              -M     Use  the character mapping mapping defined by wctrans(3).
                     such as tolower and toupper when  assigning  a  value  to
                     each  of  the specified operands.  When mapping is speci-
                     fied and there are not operands, all variables  that  use
                     this  mapping  are written to standard output.  When map-
                     ping is omitted and there are  no  operands,  all  mapped
                     variables are written to standard output.
              -R     Right justify and fill with leading blanks.  If n is non-
                     zero, it defines the width of the field, otherwise it  is
                     determined by the width of the value of first assignment.
                     The field is left filled with blanks  or  truncated  from
                     the  end if the variable is reassigned.  The -L option is
                     turned off.
              -S     When used within the assign_list of a type definition, it
                     causes  the  specified  sub-variable  to be shared by all
                     instances of the  type.   When  used  inside  a  function
                     defined  with  the  function reserved word, the specified
                     variables will have function  static  scope.   Otherwise,
                     the  variable is unset prior to processing the assignment
                     list.
              -T     If followed by tname, it creates a type  named  by  tname
                     using the compound assignment assign_list to tname.  Oth-
                     erwise, it writes all the type  definitions  to  standard
                     output.
              -X     Declares  vname  to  be a double precision floating point
                     number and expands using the %a format of ISO-C99.  If  n
                     is  non-zero,  it  defines the number of hex digits after
                     the radix point that is used when expanding  vname.   The
                     default is 10.
              -Z     Right  justify  and  fill with leading zeros if the first
                     non-blank character is a digit and the -L option has  not
                     been  set.  Remove leading zeros if the -L option is also
                     set.  If n is non-zero,  it  defines  the  width  of  the
                     field,  otherwise  it  is  determined by the width of the
                     value of first assignment.
              -f     The names refer to function names  rather  than  variable
                     names.   No  assignments  can  be made and the only other
                     valid options are -S, -t, -u and -x.  The -S can be  used
                     with  discipline  functions defined in a type to indicate
                     that the function is static.  For a static function,  the
                     same method will be used by all instances of that type no
                     matter which instance references it.  In addition, it can
                     only  use value of variables from the original type defi-
                     nition.  These discipline functions cannot  be  redefined
                     in  any  type instance.  The -t option turns on execution
                     tracing for this function.  The  -u  option  causes  this
                     function to be marked undefined.  The FPATH variable will
                     be searched to find  the  function  definition  when  the
                     function  is  referenced.  If no options other than -f is
                     specified, then the function definition will be displayed
                     on standard output.  If +f is specified, then a line con-
                     taining the function name followed  by  a  shell  comment
                     containing  the  line  number  and  path name of the file
                     where this function was defined, if  any,  is  displayed.
                     The  exit  status  can  be  used to determine whether the
                     function is defined so that typeset -f .sh.math.name will
                     return  0 when math function name is defined and non-zero
                     otherwise.
              -b     The variable can hold any number of bytes of  data.   The
                     data  can be text or binary.  The value is represented by
                     the base64 encoding of the data.  If -Z  is  also  speci-
                     fied, the size in bytes of the data in the buffer will be
                     determined by the size associated with the  -Z.   If  the
                     base64  string  assigned results in more data, it will be
                     truncated.  Otherwise, it will be filled with bytes whose
                     value  is zero.  The printf format %B can be used to out-
                     put the actual data in this buffer instead of the  base64
                     encoding of the data.
              -h     Used within type definitions to add information when gen-
                     erating information about the  sub-variable  on  the  man
                     page.   It is ignored when used outside of a type defini-
                     tion.  When used with -f the  information  is  associated
                     with the corresponding discipline function.
              -i     Declares  vname  to be represented internally as integer.
                     The right hand side of an assignment is evaluated  as  an
                     arithmetic expression when assigning to an integer.  If n
                     is non-zero, it defines the output arithmetic base,  oth-
                     erwise the output base will be ten.
              -l     Used with -i, -E or -F, to indicate long integer, or long
                     float.  Otherwise, all  upper-case  characters  are  con-
                     verted  to  lower-case.   The  upper-case  option, -u, is
                     turned off.  Equivalent to -M tolower .
              -m     moves or renames the variable.  The value is the name  of
                     a variable whose value will be moved to vname.  The orig-
                     inal variable will be unset.  Cannot  be  used  with  any
                     other options.
              -n     Declares  vname  to  be a reference to the variable whose
                     name is defined by the value of variable vname.  This  is
                     usually  used  to  reference a variable inside a function
                     whose name has been passed as  an  argument.   Cannot  be
                     used with any other options.
              -p     The  name, attributes and values for the given vnames are
                     written on standard output in a form that can be used  as
                     shell input.  If +p is specified, then the values are not
                     displayed.
              -r     The given vnames are marked readonly and these names can-
                     not be changed by subsequent assignment.
              -t     Tags  the variables.  Tags are user definable and have no
                     special meaning to the shell.
              -u     When given along with  -i,  specifies  unsigned  integer.
                     Otherwise,  all  lower-case  characters  are converted to
                     upper-case.  The lower-case option, -l,  is  turned  off.
                     Equivalent to -M toupper .
              -x     The  given  vnames are marked for automatic export to the
                     environment of subsequently-executed commands.  Variables
                     whose names contain a .  cannot be exported.

              The  -i  attribute cannot be specified along with -R, -L, -Z, or
              -f.

              Using + rather than - causes these options to be turned off.  If
              no  vname  arguments are given, a list of vnames (and optionally
              the values) of the variables is printed.  (Using + rather than -
              keeps  the  values  from  being  printed.)  The -p option causes
              typeset followed by the option letters to be printed before each
              name  rather than the names of the options.  If any option other
              than -p is given, only those variables which  have  all  of  the
              given options are printed.  Otherwise, the vnames and attributes
              of all variables that have attributes are printed.

       ulimit [ -HSacdfmnpstv ] [ limit ]
              Set or display a resource limit.  The available resource  limits
              are  listed  below.   Many systems do not support one or more of
              these limits.  The limit for a specified resource  is  set  when
              limit  is  specified.  The value of limit can be a number in the
              unit specified below with each resource, or the value unlimited.
              The -H and -S options specify whether the hard limit or the soft
              limit for the given resource is set.  A  hard  limit  cannot  be
              increased  once  it is set.  A soft limit can be increased up to
              the value of the hard limit.  If neither the H nor S  option  is
              specified,  the  limit  applies  to  both.  The current resource
              limit is printed when limit is omitted.  In this case, the  soft
              limit  is  printed  unless  H  is specified.  When more than one
              resource is specified, then the limit name and unit  is  printed
              before the value.
              -a     Lists all of the current resource limits.
              -c     The  number of 512-byte blocks on the size of core dumps.
              -d     The number of K-bytes on the size of the data area.
              -f     The number of 512-byte blocks on files that can be  writ-
                     ten  by  the current process or by child processes (files
                     of any size may be read).
              -m     The number of K-bytes on the size of physical memory.
              -n     The number of file descriptors plus 1.
              -p     The number of 512-byte blocks for pipe buffering.
              -s     The number of K-bytes on the size of the stack area.
              -t     The number of CPU seconds to be used by each process.
              -v     The number of K-bytes for virtual memory.

              If no option is given, -f is assumed.

       umask [ -S ] [ mask ]
              The user file-creation mask is set to mask (see umask(2)).  mask
              can  either  be an octal number or a symbolic value as described
              in chmod(1).  If a symbolic value is given, the new umask  value
              is  the complement of the result of applying mask to the comple-
              ment of the previous umask value.  If mask is omitted, the  cur-
              rent  value  of  the  mask is printed.  The -S option causes the
              mode to be printed as a symbolic value.  Otherwise, the mask  is
              printed in octal.

       + unalias [ -a ] name ...
              The  aliases  given  by  the  list of names are removed from the
              alias list.  The -a option causes all the aliases to be unset.

       +unset [ -fnv ] vname ...
              The variables given by the list of vnames are unassigned,  i.e.,
              except  for  sub-variables  within  a  type,  their  values  and
              attributes are erased.  For sub-variables of a type, the  values
              are  reset to the default value from the type definition.  Read-
              only variables cannot be unset.  If the -f option is  set,  then
              the  names  refer  to  function names.  If the -v option is set,
              then the names refer to variable names.  The -f option overrides
              -v.   If  -n is set and name is a name reference, then name will
              be unset rather than  the  variable  that  it  references.   The
              default  is  equivalent  to  -v.   Unsetting  LINENO, MAILCHECK,
              OPTARG, OPTIND, RANDOM, SECONDS, TMOUT, and _ removes their spe-
              cial meaning even if they are subsequently assigned to.

       wait [ job ... ]
              Wait  for  the  specified job and report its termination status.
              If job is not given, then all currently active  child  processes
              are  waited  for.   The exit status from this command is that of
              the last process waited for if job is specified; otherwise it is
              zero.  See Jobs for a description of the format of job.

       whence [ -afpv ] name ...
              For each name, indicate how it would be interpreted if used as a
              command name.
              The -v option produces a more verbose  report.   The  -f  option
              skips  the  search  for  functions.   The  -p option does a path
              search for name even if name is  an  alias,  a  function,  or  a
              reserved  word.   The -p option turns off the -v option.  The -a
              option is similar to the -v option but  causes  all  interpreta-
              tions of the given name to be reported.

   Invocation.
       If the shell is invoked by exec(2), and the first character of argument
       zero ($0) is -, then the shell is assumed to be a login shell and  com-
       mands  are  read from /etc/profile and then from either .profile in the
       current directory or $HOME/.profile, if either file exists.  Next,  for
       interactive shells, commands are read from the file named by performing
       parameter expansion, command substitution, and arithmetic  substitution
       on  the  value  of the environment variable ENV if the file exists.  If
       the -s option is not present and arg and a file  by  the  name  of  arg
       exists,  then  it  reads  and  executes this script.  Otherwise, if the
       first arg does not contain a /, a path search is performed on the first
       arg  to  determine  the  name of the script to execute.  The script arg
       must have execute permission and any setuid and setgid settings will be
       ignored.   If  the script is not found on the path, arg is processed as
       if it named a built-in command or function.  Commands are then read  as
       described  below;  the  following  options are interpreted by the shell
       when it is invoked:

       -D      Do not execute the script, but output the set of double  quoted
               strings  preceded  by a $.  These strings are needed for local-
               ization of the script to different locales.
       -E      Reads the file named by the ENV variable or by $HOME/.kshrc  if
               not defined after the profiles.
       -c        If  the -c option is present, then commands are read from the
                 first arg.  Any remaining arguments become positional parame-
                 ters starting at 0.
       -s        If  the  -s option is present or if no arguments remain, then
                 commands are read from the  standard  input.   Shell  output,
                 except  for  the output of the Special Commands listed above,
                 is written to file descriptor 2.
       -i        If the -i option is present or if the shell input  and  error
                 output  are attached to a terminal (as told by tcgetattr(2)),
                 then this shell is interactive.  In this case TERM is ignored
                 (so  that kill 0 does not kill an interactive shell) and INTR
                 is caught and ignored (so that wait is ).  In all cases, QUIT
                 is ignored by the shell.
       -r        If the -r option is present, the shell is a restricted shell.
       -D        A list of all double quoted strings that are preceded by a  $
                 will  be  printed on standard output and the shell will exit.
                 This set of strings will be subject to  language  translation
                 when  the locale is not C or POSIX.  No commands will be exe-
                 cuted.

       -P        If -P or -o profile is present, the shell is a profile  shell
                 (see pfexec(1)).

       -R filename
                 The  -R filename option is used to generate a cross reference
                 database that can be used by a separate utility to find defi-
                 nitions and references for variables and commands.  The file-
                 name argument specifies the generated database. A script file
                 must be provided on the command line as well.

       The remaining options and arguments are described under the set command
       above.  An optional - as the first argument is ignored.

   Rksh Only.
       Rksh is used to set up login names  and  execution  environments  whose
       capabilities are more controlled than those of the standard shell.  The
       actions of rksh are identical to those of ksh, except that the  follow-
       ing are disallowed:
              Unsetting the restricted option.
              changing directory (see cd(1)),
              setting  or  unsetting  the  value  or attributes of SHELL, ENV,
              FPATH, or PATH,
              specifying path or command names containing /,
              redirecting output (>, >|, <>, and >>).
              adding or deleting built-in commands.
              using command -p to invoke a command.

       The restrictions above are enforced after .profile and  the  ENV  files
       are interpreted.

       When  a  command  to be executed is found to be a shell procedure, rksh
       invokes ksh to execute it.  Thus, it is possible to provide to the end-
       user  shell  procedures that have access to the full power of the stan-
       dard shell, while imposing a limited  menu  of  commands;  this  scheme
       assumes  that  the end-user does not have write and execute permissions
       in the same directory.

       The net effect of these rules is that the writer of  the  .profile  has
       complete  control  over  user  actions,  by performing guaranteed setup
       actions and leaving the user in an appropriate directory (probably  not
       the login directory).

       The  system  administrator often sets up a directory of commands (e.g.,
       /usr/rbin) that can be safely invoked by rksh.

EXIT STATUS
       Errors detected by the shell, such as syntax errors, cause the shell to
       return a non-zero exit status.  If the shell is being used non-interac-
       tively, then execution of the shell file is abandoned unless the  error
       occurs inside a subshell in which case the subshell is abandoned.  Oth-
       erwise, the shell returns the exit status of the last command  executed
       (see  also  the  exit  command above).  Run time errors detected by the
       shell are reported by printing the command or  function  name  and  the
       error  condition.   If  the  line  number that the error occurred on is
       greater than one, then the line number is also printed in square brack-
       ets ([]) after the command or function name.

FILES
       /etc/profile
              The  system wide initialization file, executed for login shells.

       $HOME/.profile
              The personal initialization  file,  executed  for  login  shells
              after /etc/profile.

       $HOME/..kshrc
              Default  personal  initialization file, executed for interactive
              shells when ENV is not set.

       /etc/suid_profile
              Alternative initialization file, executed instead  of  the  per-
              sonal  initialization  file  when the real and effective user or
              group id do not match.

       /dev/null
              NULL device

SEE ALSO
       cat(1), cd(1), chmod(1), cut(1), egrep(1), echo(1),  emacs(1),  env(1),
       fgrep(1),  gmacs(1),  grep(1),  newgrp(1), pfexec(1), stty(1), test(1),
       umask(1),  vi(1),  dup(2),  exec(2),  fork(2),  getpwnam(3),  ioctl(2),
       lseek(2),   paste(1),   pathconf(2),   pipe(2),  sysconf(2),  umask(2),
       ulimit(2), wait(2), wctrans(3), rand(3),  a.out(5),  profile(5),  envi-
       ron(7).

       Morris  I. Bolsky and David G. Korn, The New KornShell Command and Pro-
       gramming Language, Prentice Hall, 1995.

       POSIX - Part 2: Shell and  Utilities,  IEEE  Std  1003.2-1992,  ISO/IEC
       9945-2, IEEE, 1993.

CAVEATS
       If  a  command  is  executed,  and then a command with the same name is
       installed in a directory in the search path before the directory  where
       the  original  command  was  found, the shell will continue to exec the
       original command.  Use the -t option of the alias  command  to  correct
       this situation.

       Some very old shell scripts contain a ^ as a synonym for the pipe char-
       acter |.

       Using the hist built-in command within a compound  command  will  cause
       the whole command to disappear from the history file.

       The  built-in  command  . file reads the whole file before any commands
       are executed.  Therefore, alias and unalias commands in the  file  will
       not apply to any commands defined in the file.

       Traps  are  not  processed while a job is waiting for a foreground pro-
       cess.  Thus, a trap on CHLD won't be executed until the foreground  job
       terminates.

       It  is  a good idea to leave a space after the comma operator in arith-
       metic expressions to prevent the comma from being  interpreted  as  the
       decimal point character in certain locales.



                                                                        KSH(1)

NAME | SYNOPSIS | DESCRIPTION | EXIT STATUS | FILES | SEE ALSO | CAVEATS